Free Shipping on Orders Over $75. Details

Talk to Wrangler Enthusiasts
Everyday 8:30AM EST - 11:00PM EST
Win Any Lift Kit For Your Jeep! Enter Daily

Off Camber Fabrications by MBRP Rock Rail Kit - LineX Coated (07-18 Jeep Wrangler JK 2 Door)

Market Price $934.49 You Save 5% ($44.50)
Our Price

$889.99 (pair)

FREE Shipping

  • Item J104343
  • MPN# 130880LX

Will this fit your Wrangler?

In Stock Ships same business day.
Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    Features, Videos & Details

    • Unmatched Impact Resistance
    • Shore-D Hardness Rating
    • Corrosion Resistant Finish
    • Water Tight Coating
    • Stainless Steel Construction
    • Quick & Easy Installation
    • Fits 2007-2018 Jeep Wrangler JK 2 Door

    Review & Installation Video

    I'm Ryan from, and this is my review and installation of the Off Camber Fabrications by MBRP Rock Rail Kit, fitting all 2007 to 2016 JKs. There is a version of these available for both the two-door and the four-door JK, so make sure you get the right one for your Jeep. Today, we're gonna talk about the construction and, of course, the installation of these rock rails. These are for those of you who are looking for some light side protection on your Jeep, and also a step to make it easier to get in and out of your Wrangler, but aren't looking for the most protection that money can buy. These are going to protect you against some door dings on the road and some light trails off-road. However, the way that this bar is designed and attached to the rest of the rail make it a little bit weaker than I would like it to be if you're going to be taking your Jeep on the hard-core trails. However, these are still priced at the top of the price range where those more protective rails are. These off-rails are built from 3/16-inch steel, and these ones are covered in a Line-X coating right out of the box. That means that at least the finish will hold up really well when you drag them along the rocks. As I said before, these are a little bit weaker than some of the other rails on the market, in my opinion, and in part because they come in two different pieces - the rail itself and then the step bar. The step bar bolts onto the rail, which isn't going to be as solid of a connection as a welded one would be. Now, the way these mount onto the Jeep is really similar to the way a lot of other ones mount onto the pinch seam and onto the bottom of the tub, so from that standpoint, they are going to give you a good amount of strength. They're not gonna be quite as strong as the one that mount on your body mounts, but they will be plenty strong for those light trails and for some on-road protection. The installation for these rock rails does require a little bit of drilling, so if that's not something you're comfortable with, maybe you wanna look at one of the other options from Barricade, Rugged Ridge, or Smittybilt, that all provide steps and rock rails in this fashion that don't require drilling to get them installed. All of that being said, the drilling you're doing is really just enlarging a couple of holes that are already existing in the pinch seam of your Jeep. The first step is to remove any existing rail that you might have, and then go ahead and enlarge a couple of holes to half an inch. You're really enlarging those holes so that you can put the proper fender nuts in place to get these bolted on. Once you have the holes enlarged and the fender nuts in place, you can hang the rock rails from a couple of bolts loosely, and then add the rest of the hardware, threading into the bottom of the tub. Once everything is in place finger-tight, you can go ahead and torque everything down. This should take you about an hour to install both of these steps, but as I mentioned before, this a little bit more of an involved install, requiring you to have a drill and a good set of drill bits handy. These rock rails are going to be a lot more expensive than a lot of the other rails on the market, and for something that, in my opinion, based on the way that it mounts and the way that this bar bolts and isn't welded onto the rest of the rock rail, these aren't going to be as strong as some of the options on the market that are half the cost of these ones. So it really comes down to what you're looking for. This is a bit more of a unique design, it comes out of the box Line-Xed if you decide to go with that option, and they will give you some of that light protection. However, if you're looking to save a few dollars and/or get some additional protection, there are some other options on the market that I'd recommend you looking at. So if you're looking to add some rock rails on the side of your Jeep for light protection, on-road and off, and also to have a step to make it easier to get in and out of the Jeep, this is certainly an option to take a look at. If you have the budget for it and you like the look of these, they are a little bit unique. However, if these are a little bit out of your budget or if you're looking for more protection, there are some other options to take a look at. So that's my review of the Off Camber Fabrications by MBRP Rock Rail Kit, fitting all 2007 to 2016 JKs, that you can find right here at

    Outstanding Impact Resistance. Whether you're taking your Jeep off-road or simply want to protect it from everyday road hazards, the Off Camber Fabrications by MBRP Rock Rail Kit provides the superior protection you need. With rugged formed 3/16" steel plates and mandrel bent heavy gauge full-length steel tubing, this rock rail kit is built for superior durability.

    LINE-X Protective Coating. Sprayed with an innovative LINE-X water tight seal coating for your peace of mind, this Rock Rail Kit provides excellent resistance to scratching and abrasions. LINE-X is known by Jeep enthusiasts for its unmatched quality and long lifespan.

    Easy Out-of-the-Box Installation. Designed for simple installation, the Off Camber Fabrications by MBRP Rock Rail Kit requires no welding or drilling for fast installation. All mounting hardware is included.

    Application. The Off Camber Fabrications by MBRP Rock Rail Kit is compatible with 2007-2018 Jeep Wrangler JK 2 door models.

    Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Details

    CA Residents: Warning: California's Proposition 65

    What's in the Box
    • (2) 3/16” Plate Steel Rock Rails
    • All Installation Hardware
    Installation Info
    Tech Specs
    Will it fit my Wrangler?

    You Might Also Like

    Customer Photos

    More Products You Might Like

    Q & A

    No questions about this product yet.

    Ask the First Question


    Related Wrangler Categories