Talk to a Wrangler Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
$20K Sweeps! 10 Chances to Win! Enter Daily >

N-Fab RSP Front Bumper - Textured Black w/ Multi-Mount System (07-18 Jeep Wrangler JK)

Item J105882
ExtremeTerrain no longer carries the N-Fab RSP Front Bumper - Textured Black w/ Multi-Mount System (07-18 Jeep Wrangler JK). Please check out Home for an updated selection.
Verify parts fit and get product recommendations.
Wrangler Sales Techs: Connect Now M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00

    Product Videos

    I'm Ryan from extremeterrain.com, and this is my review and installation of the N-Fab RSP Front Bumper with provision for two LED light bars, fitting all 2007 and up JKs. Today, we are gonna talk through the installation of this bumper which is a very simple one out of three wrench installation. You'll be able to get this installed on your Jeep, in your driveway in about an hour, but we'll talk more about the install in just a second. We're also gonna talk through the construction and a few of the features of this bumper.This bumper is described by N-Fab as a Prerunner style. So, it does have that slanted skid plate on the front like you would see on a Prerunner truck. Which isn't a style that you see a lot on Jeeps. So, this is going to be a unique look. Now, something else that makes this unique is the fact that it's designed to accept not 1, but 2 38-inch LED light bars which is a ton of light. Now, it's not necessary to run two bars or even to run one, but because the bumper is designed for it if you don't have two light bars across the front here, these ears are kind of sticking up and not doing anything.So, in my opinion, if you are gonna purchase this bumper, you are going to run at least one light bar on it. Two light bars is gonna be overkill, in a lot of people's opinions and, to be honest with you, the style of this bumper, because it is so unique, it's not going to be for everyone. But there are those of you out there that are looking for a Prerunner style, stubby front bumper that want this more industrial, hardcore, simple and minimalist look that can accept a couple of light bars. And for those of you, this bumper is a great option. And, moreover, it's one of the only options out there. Again, this is unique, there aren't a lot of bumpers that look like this one does.If there's one thing I can say about this bumper, is that this thing is solid. This is a stubby front bumper but it shows a lot of mass into a small package. This is an inch and 3/4-steel tubing, with steel plate. This is 3/16ths-inch aluminum plate for this kickplate that's on the front here. As you can see, it is etched with the N-Fab logo on the front, and the bumper is also etched with the logo. Those of you who have seen other reviews that I've done know that I don't love having a logo on the front or prominently displayed on my parts, but that's just me. Some of you don't mind it, some of you really like it. N-Fab is really proud of their product, they're proud of being made in the USA, so they want people to know. And they have their logo really big on the front there.Now, even though this is called a skid plate, there isn't much in that area of the Jeep to protect. If you have a Rubicon and you have the electronic sway bar disconnected, of course, that's going to be in that area. But other than that, there's not a lot in that front area to protect. However, that is what gives this bumper a lot of its style. It is what makes it that Prerunner style, so, that's why that's there. Again, if you get the version of this with the winch plate, it does have a cutout in the lower section here for the winch line to go through. Up here you do have these 2 slider holes in the ears that stick up on the bumper and that's for those 2 38-inch LED light bars.N-Fab will tell you that this is designed to accept 38-inch rigid light bars, if you can find any other light bars on the market that aren't 38 inches in length, you could probably install those as well, but this is designed for the rigid light bars. And again, if you put two of them, slider holes would be just the up and down and you can also adjust the tilt of those light bars. You can certainly run one light bar if you'd like. And, there is another version of this bumper that instead of being designed for two light bars, is designed to have individual light pods mounted across the top. So, there's that option as well. In fact, this bumper does have some holes drilled in it, so if you got creative, you could probably mount some light pods on here if you chose to.Like most aftermarket front bumpers, this one's going to install onto your Jeep very easily. The first step is, of course, removing your factory front bumper which you'll do by removing the splash shield and then removing the frame cover. Finally, you'll unclip and unsnap your fog lights, and then remove the eight nuts that are holding your factory bumper in place. Once you remove that bumper, it's a simple matter of lifting this big, heavy bumper onto the frame boards and the included hardware to bolt it on. Now, because this is heavy, having an extra set of hands around won't hurt. However, you won't need any specialty tools to get this done, just your traditional hand tools. Again, I am giving this a one out of three wrenches, and you should be able to get this installed in about an hour. Once the bumper is bolted onto the Jeep, you can go ahead and install whatever light bars you choose to install on it, and, of course, get those wired up.Now, as I said before, this bumper is very solid. It's a very well-built bumper. This is a made in the USA bumper, a solid finish on it, it does have some aluminum on it, which of course, will always drive up the costs a little bit. And as I said before as well, N-Fab is very proud of this bumper. This bumper here is gonna come in at just under $600. And for a stubby bumper, that doesn't accept your factory fog lights, that doesn't have D-ring mounts, that doesn't have any sort of hoop or stinger, it does seem like it's a fairly simple bumper with not a ton of features for that price. However, as I mentioned before, this is a unique-style bumper. So, if you like this style, then this is gonna be a great option for you. As I said before, if I'm judging this base off of build quality, this is built like a tank. It just doesn't quite have all of the features I would like to see on a bumper of this price point.So, if you're looking for a stubby front bumper for your Jeep and you like this Prerunner style with the slanted front skid plate, and you like the ability to run not 1, but 2 38-inch LED light bars, this is going to be a really nice bumper to take a look at if you want great build quality and you have the budget for it. So, that's my review of N-Fab RSP Front Bumper with provision for 38-inch LED light bars, fitting all 2007 and up JKs that you can find right here at extremeterrain.com.

    Product Information

    Features, Description, Reviews, Q&A, Specs & Installation

    Features

    • Full Replacement Front Bumper with Skid Plate
    • 1-Piece Construction; Aluminum Skid Plate
    • 0.095 Wall Tubing
    • Textured Black Powder Coat; Polished Aluminum
    • 1 Front Bumper with Skid Plate
    • Made in the USA
    • Mount Up to Four 9” Lights (Not Included)
    • Bolt On Attachment with No Drilling Required
    • Fits 2007-2018 Jeep Wrangler JK Models

    Description

    Versatile Front End Protection. Outfit your Jeep for any trip that you have in mind with the N-Fab RSP front bumper. This versatile bumper can be outfitted in different ways for the look and level of protection that you want. it features a unique multi-mount system for adding accessories at a later date.

    Light Mounts. While this bumper doesn't come with lights built-in, it does have mounting points for four different 9"" lights, letting you add auxillary light if you choose to.

    Steel and Aluminum. The N-Fab RSP front bumper is made from a mix of .95"" steel tubing as well as a solid aluminum skid plate for maximum strength and protection. The steel is heavily coated so this full bumper is corrosion resistant.

    A Simple Installation. The bumper goes on quickly and easily with basic bolt-on install process. The N-Fab RSP front bumper is designed to install in just two hours from start to finish.

    Fit and Finish. Both the materials and the finish of this bumper kit come with a warranty. The actual materials are covered by a lifetime warranty and the finish is covered for five years.

    Application. The RSP front bumper installs easily on any Jeep Wrangler 07-17 JK.

    Freight Notes. Freight items can only be shipped within the continental 48 states, no expedited methods. What is freight shipping? Your Answers are Right Here!.

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Installation & What's in the Box

    Installation Info

    What's in the Box

    • Front Bumper in Textured Black Powder Coat
    • Mounting Hardware

    Tech Specs

    5.0

    Customer Reviews (1)

      Brand Image

      Reviews of N-Fab Exterior products have an average rating of 4.7 out of 5

        Questions & Answers

        10 More Questions

            Related Wrangler Categories