Motobilt Rocker Guards for Comp Cut Corners with Tube Step; Bare Steel (04-06 Jeep Wrangler TJ Unlimited)Find parts that fit my vehicle

The Motobilt Jeep LJ Rocker Guards for competition or stretch cut corners with tube step are in-house laser cut from 3/16 inch high strength steel. The Rocker Guards extend up to the bottom edge of the door and bend underneath the jeep to protect it. They completely cover the front and the back past the wheel well opening. This extra length when used with the Motobilt comp cut or stretch cut corners allows for a more proportional look and additional protection.The slots in the bottom make it easier to wash mud and debris out. A heavy duty step is made from 1.75 inch DOM steel tube with an integrated grimple plate for additional grip when getting in and out of the Jeep. Motobilt Jeep LJ Rocker Guards are countersunk and ship bare metal with hardware included. Hardware 12- 5/16 inch counter sunk bolts with flat washers and nyloc nuts. These work well with Motobilt LJ competition corners PN MB1061. Our rocker guards are formed so that they wrap under neath the body of your jeep and tie into the factory body mounts.This allows for the ultimate in under body protection and strength. We also slot the lower portion of the rocker guards to make it easy to clean out your rockers after a hard day of wheeling.Weight: 85lbs (approx.)SpecificationsFeatures:Jeep LJ Rocker Guards for Competition and Stretch Cut Corners with tube stepLaser cut from 3/16 inch high strength steelStep is made from 1.75 inch DOM steel tubeHardware 12- 5/16 inch counter sunk bolts with flat washers and nyloc nutsWorks with or without a body lift.67 1/2”s long at the top of the rocker and the notched version is 66 1/2”s Sold as pairCompatible Motobilt Corner Guards:MB1061 Comp Cut Corner GuardsMB1065 Blank Corner GuardsNote:Drill Bit Size: 5/16” nut serts use a 17/32” drill bit to install.Ships raw steel. Must be painted or powder coated to prevent rust. See (Steel-It)This extra length when used with the Motobilt comp cut (MB1061) allows for a more proportional look and additional protectionIf running the Motobilt front fenders, then choose the drop down menu option for our fenders. They are shorter and have a notch cut out to clear the Motobilt fenders.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov