(approx) 15 Minutes
Simple installation for anyone.
- Customer Submitted:
- How to Install MORryde Side Mount Tray on your Wrangler
Features, Description, Reviews, Q&A, Specs & Installation
Maximize Space. Store your fuel or water cans up and out of the way of hazards with the MORryde Side Mount Tray. This kit includes an easy to mount tray as well as a ratchet strap for securing your favorite storage can. It is compatible with Jerry, NATO and Scepter Cans and will help create a classic look with practical function. Carry the fuel, water or supplies you'll need for a long trail run without taking up your precious cargo space.
No Drilling. This mount installs easily without modification to your JK's body, but for those looking for a fully secure mount, you will need to drill one hole out of sight under your hood. The mount is designed for easy removal in the event you don't need to carry extra fuel, giving you the option of a stock look, when and where you want it.
Application. The MORryde Side Mount Tray is designed for installation on 2007-2018 Jeep Wrangler JK and JK Unlimited models. Please select Driver or Passenger Side from the options above. Gas can sold separately.
Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
January 13, 2020
Very nice look; didn't last
I loved these when I installed them on both sides. There was one hard to deal with nut that took some effort but that was the only issue. Here's the catch... I've had them for a year or so now, and both sides have had the door hinge mount crack and break off. I'm not sure what's up, but the mild steel of that lower attachment point sheered off after use on mine. If you have them installed, look for cracks near where the door hinge mount hooks to the carrier.Helpful (1)
November 29, 2019
The nut was pretty tricky. I ordered the driver’s side mount (open box). I received the passenger side mount. Whatever, still happy with the product and price. Fast delivery with good customer service.Helpful (1)
July 11, 2019
Great product, worth every penny! Comes in handy when you need some extra fuel.Helpful (2)
June 02, 2019
Very solid construction and it installed in a very short amount of time. I didn't want to add weight to the tailgate nor obstruct my rear view anymore than I already have. Everywhere I go I get asked about it. Apparently very few people have seen the side mount before.Helpful (1)
March 25, 2019
MORryde Jerry Can Mount
Very easy to install and looked great. I used with my 5 gal. Jerry can and it fit perfect. It came with rubber bumpers that when installed fit against the can tightly and keep it from rattling. Included ratchet strap was a nice extra but I'm going to fab up a locking solution in the future. I think it's a great way to carry extra fuel or water in a seldom used space on the Jeep.Helpful (1)
March 17, 2019
Fit was great 5 gallon metal can fit great. Could design a better hold down system but not a show stoper. Before you start to install buy new hardware. I read reviews that they sieze up so i lubed the threads and they still stuck going on before it was tight.Helpful (2)
February 25, 2019
GREAT OPTION FOR NO DRILLING!
Super easy to install, took me like 30mins tops, and looks amazing too.Helpful (4)
February 12, 2019
They need to fix their poor quality bolt issue, 3 nuts froze before they were tight during the assembly process. Same as another reviewer had to stop and go buy 4 bolts and nuts before completing the assembly.Helpful (4)
January 14, 2019
Easy to install and works fine
I love how simple it is, it fits in through a couple screws and that's it, no maki mlm g extra holes just slide it on the side of your jeep and it's done, it even holds my Jerry can just fine and I love it.Helpful (5)
January 14, 2019
Works well, with a few exceptions...
The install on this was straightforward, and it went in well. Two notes: The instructions lack a few details (eg.,lower rubber bumper placement), and MoRryde's directions to include a lock work--but they fail to tell you that you must leave the lock cable permanently threaded through the u-bolt, since the ends are too big to fit through (using the exact u-bolt and the exact locking cable MoRyde recommends). Still, it works when you make that adjustment.Helpful (6)
Is this bolted straight onto the panels without any protective layer in-between? That'll do wonders for the paintwork and cause rust once vibration and dust have ground down to the bare metal.
This will not include any form of gasket/insulator.
I recently purchased the mirror relocation kit and moved my mirrors off the doors to the door frame just in-front of where they were. Will this jerry can mount work on my jeep now? Or will the mirrors be in the way?
The MORryde Side Mount Tray will interfere with most body mounted mirror relocation brackets.
Will the height of a jerry can cause the side mirror to hit when opened all the way? The plastic gas can in the picture looks shorter than a metal JerryCan. Thank you.
The mirror should not contact the Jerry can as long as the door limit straps are still installed.
Would this work with a Gobi Stealth rack installed? I believe it would share a bolt with the rack near the front windshield)? If yes, would I have to get a slightly longer bolt?
You can see that there are customer pictures of this item used with Roof Racks. I would recommend getting a longer bolt to do that.
Hi I mounted door hinge steps for roof rack will side mount tray hit hinge steps when opened
We have not tested these 2 together, due to the setup there is a high chance they would hit each other when used together.
The MORryde Side Mount Tray will not work on a 97 Wrangler TJ Sport.
The MORryde Side Mount Tray would be incompatible with the Barricade Roof Rack due to shared mounting points and clearance issues.
The MORryde Side Mount Tray does not have provisions for a lock.
Hello, yes, this will clear the antenna for the passenger side.
Hello, This unit is flush with the body. If properly installed you should not see any damage.
The tray is designed to fit standard jerry cans, NATO cans and Scepter cans. Many ammo cans will also fit. Some 5-gallon "consumer" gas cans may be larger than the standard listed cans above.
The factory door check strap prevents the door from contacting the gas can or the mount.
You should be fine with that combination. If it turns out that there is some interference, the jerry can tray can be mounted slightly forward, there are two mounting positions on the bracket for the tray.
The inside dimensions of the tray are 14" x 7"
(approx) 15 Minutes
Simple installation for anyone.
What's in the Box