(approx) 5 Minutes
Simple installation for anyone.
FREE 2 or 3-Day Delivery on 10,000+ Items. Details
$164.99 (set of 4)FREE Shipping
Saved - View your saved items
We're sorry. We couldn't save this product at this time.
Mopar All-Weather Front and Rear Floor Mats; Black (18-23 Jeep Wrangler JL 4-Door, Excluding 4xe)
Rugged Ridge Reflex Stubby Antenna; 15-Inch (97-18 Jeep Wrangler TJ & JK)
Weathertech DigitalFit Cargo Liner; Black (18-23 Jeep Wrangler JL 4-Door w/ Subwoofer & Flat Load Floor, Excluding 4xe)
These Mopar door sill guards in stainless steel are for those of you that have a 4-door 2018 and up JL and are looking for a way to change up the look of your Jeep a little bit as well as offer a little bit of protection. The sill area of a lot of the Jeeps has been left pretty much open to the elements right from the factory. And this is an area that can get a lot of scratches. So a sill guard is going to be a good idea, again, for some protection. And this is also gonna dress up the appearance of your Jeep a good bit as well. This is a nice easy one out of three wrench installation. I'm gonna walk you through exactly how to get these installed in just a second. So, there have been a bunch of different styles of sill guard in the past for the TJs and for the JKs. And some of those will wrap down a little bit on to the front painted surface of the tub and also up onto this little bit of a lip. And those ones are gonna offer even more protection than these ones are going to. However, if you don't have a side step and you find yourself stepping on this area, or again, if you just wanna have a little bit more protection and change up the look, this is gonna be a really, really good choice. These are going to be stainless steel. So even if you were to get a little bit of a scratch on one of them, they're not going to rust, which is a very nice feature, and they're also going to be even more durable than some of the plastic options that are going to be out there, I'm sure. This is going to have a kind of a cool laser etched honeycomb design to it, which again, adds a little bit to the aesthetic. And it has a raised Wrangler right down the middle. These are Mopar. These are a genuine product directly from Mopar that you can get. And in general, when you're looking at something that is from Mopar and that has the word Wrangler on it, you can expect to pay a little bit more for it. And these are going to be a little bit more expensive than some of the other sill guards that you might find. However, because they are stainless, because they do have the wrangler embossed on them, and because they are pretty high quality, I do think they're gonna be worth a little bit more than some of the other ones. Of course, you'd expect to spend a little bit more on stainless than you would on plastic. These are gonna come in at $145. That's for the entire set of four for your 4-door JL. And again, for the quality, I don't think that is too bad of a price. Now I'm gonna show you exactly how to get these installed on your Jeep. So like I said, this is a very simple one out of three wrench installation. This is not going to take long at all. All of these sill guards have 3M adhesive pre-applied to the back of them. So all you have to really do is peel and stick. But there's a little bit of prep work to do beforehand. The first thing that you'll need to do is only apply these when the temperatures are moderate. I would say right around that 75 to 85 degrees. If it's much hotter than that or much colder than that, the 3M adhesive won't wanna set up properly and these are not going to stick as well as they should. So do keep that in mind. And the other thing is that you want the area to be very, very clean. If there's a lot of heavy dirt and debris, you can wipe it off with some detailer, soapy water, whatever you wanna use. And once it's fairly clean, you wanna use an alcohol prep pad that comes in the box to make sure the surface is as clean as possible and free of any oil residue, again, just to make sure that that adhesive is going to stick down properly. So the first thing we're going to do is really just set this in place roughly where it's going to go so we can get an idea of the area that we need to clean. On the backside of this is going to be marked left hand and right hand so we know this is the one that goes here. And there are some pretty detailed measurements on the installation instructions on how far back from the edge the front of the sill guard is supposed to be and on how far from this curve it's supposed to be. So we're going to go ahead and line it up roughly where it's gonna go, think that's probably where we're gonna put it. And now we know where those 3M adhesive strips sit. So we can go ahead and use our alcohol prep pad to clean the area. So while we're waiting for the alcohol to dry, we can go ahead and prep the 3M adhesive. It has, of course, this protective backing on it. And what you're going to do is peel up the corner of each of these four strips here so that they're accessible from the front of the sill guard, so just kind of curl them over there so that you can pull them from the front. And what that's going to allow us to do is seat the sill guard exactly where we want it before fully sticking it down. So again then from the front, you can see that you'll have access to all four of these tabs to fully peel them. So now that the alcohol is dry, we can set this in place. Now we'll repeat the same process for the back door. So if you're looking to add a little bit of door sill protection and dress up the look of your Jeep a little bit as well, I would recommend these door sill guards from Mopar, and you can find them right here at extremeterrain.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Keeps Doorsills Looking Good as New. When you’re a stickler for details and you love to keep your 2018-2023 Jeep Wrangler JL 4-door looking pristine as the day it rolled out of the dealership, these stainless steel Mopar Door Sill Guards are just for you. This stainless steel cover protects your door sills from the scratches and scrapes of everyday use. Not only that, the acid-etched, honeycombed design with Wrangler logo is a great-looking addition to your Jeep interior, too.
Stainless Steel Shield. The Mopar Door Sill Guards are made of fine stainless steel sheet. It’s a hardwearing shield that’s perfect even for off-road use where you can expect most of the scratches and scruffs to happen. The door sill shields passed all quality testing for water immersion, cleanability, temperature-resistance, and scratch-resistance. It’s safe to say that the Mopar Door Sills are engineered to last for a long time.
General Warranty Policy. Just like most of Mopar’s over-the-counter products, the Mopar Door Sill Guards are backed by a 2-year warranty on materials and workmanship. If you wish to learn more about the warranty details, please visit the manufacturer’s website or the manual that the product came with.
Application. The Mopar Door Sill Guards fit all 2018-2023 Jeep Wrangler JL 4-Door models.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
(approx) 5 Minutes
Simple installation for anyone.
What's in the Box
10 More Questions