(approx) 30 Minutes
Simple installation for anyone.
$79.99 (set of 4)FREE Shipping
Open Box from $30.48
Hey guys, so today I'm here with the Mopar Door Sill Guards in Black, fitting all 2018 and newer 4-Door JL Wranglers. So if you're looking for small but noticeable modifications to improve the look as well as the functionality of your JL, this option by Mopar is gonna be a good one to take a look at. So this is gonna be perfect for that JL owner who's looking for some extra protection for their door sills, they don't wanna scuff up their paint, or this is also perfect if you already have some existing damage and you're looking to cover that up. So this is gonna be able to handle whatever you throw at it, made of a durable black plastic material. It is gonna be attached by automotive-grade 3M double-sided tape, so they will stay in place for a very long time. Overall, I think these are gonna look really good. They do have the honeycomb design that will actually match with the factory running boards if you have them installed on your JL already. And you do get the Wrangler logo printed right on the front door sill for a little bit of extra style to your Wrangler. Now, these are gonna be one of the only options for door sill guards for the 4-door JL at the moment at roughly $75. However, they will be your most affordable choice at the moment as well. So the other option on the page is gonna be provided by Mopar. However, it is gonna be a little bit more expensive because of the stainless steel finish that is offered with the more expensive choice. However, I personally think if you're looking for something sleek, if you're looking for a small but noticeable mod again, that's gonna add some functionality and some stylish accenting to your Wrangler, these are going to be a really good pick. So install is gonna be a one out of three wrenches on the difficulty meter. Like I said, this is attached by 3M tape so you're not going to need any tools. There's no drilling, there's no hardware required. So speaking of that install, let's jump into it now.So to kick off this install, we're gonna start on the front driver side and you are gonna need your alcohol prep wipe and we're gonna prep the surface for our door sill guard. You just wanna clean this whole area with this wipe, making sure that no dirt or dust or anything is going to mess with the adhesion process, and the alcohol should dry fairly quickly. So what we can do at this point is kind of mock up where we want our door sill guard to sit. So right around that area. I'm just gonna line that up with this hole on the back here. Then we can tear away our adhesive protector strip. I do like they give you a little tab so you don't have to fight with that, peeling that off. So once that backing is off, we can carefully put this back into the place where we want it. So I'm just gonna line up this edge with this little indent here, making sure that the lip is on the inside and that Wrangler, the W is facing the front of the Jeep. And after that's in place, we can press this down and hold it for about 30 seconds. And then you're all set to go.So now we're moving to the rear. It's gonna be a little bit smaller, so we do wanna take that alcohol wipe. You can always grab a new one as well. This does come with 4 in the kit. Just gonna use the one that we previously used on the other side. Wait for that alcohol to dry. And then we can peel our backing for our 3M tape. This is gonna be an automotive-grade 3M tape so it is going to stick on here for a very long time. And we're going to place this in the door sill where you want it to sit. Go ahead and press that one down as well. And once your door is closed, this will actually seal and just promote the adhesion that much more. So these really aren't going to move on you at all. But after you're finished with this one, all you have to do is do the same thing on the other side and you're all set to go.That's gonna wrap it up for my quick review and install. Make sure you like and subscribe. And for more videos like this, always keep it right here at extremeterrain.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Unbeatable Protection. If you're searching for an easy way to ensure your 2018-2020 Jeep Wrangler JL's door sills stay in ideal condition despite the continued abuse they take from you and your passengers, simply install Mopar's Black Door Sill Guards. These guards are perfectly created for your Jeep's door sills and secure directly to the sills, guarding them against damage that could otherwise reduce your Jeep's resale value.
Superior Design. Not only do these guards offer protection against scratches, scuffs, fluid damage, and general muck and grime, but they also provide a boost in style. Featuring molded three-dimensional honeycomb patterning that looks fantastic yet doesn't interfere with your Jeep's door function or door seal, these guards are made to turn heads wherever you go.
Strong Construction. These guards are created from durable plastic, making them an ideal choice for those who often take on seriously demanding high-performance applications in challenging environments. Finished with a heavy-duty black coat that adds aggression and sporting an aggressive Jeep Wrangler logo, these door sills will impress in both form and function.
Installation. For those with light mechanical skills, securing these door sill guards is simple. Just set aside about 20 minutes for the installation.
Warranty. These door sill guards boast a 24-month limited warranty. Some limitations apply, so see the full warranty for details.
Application. Mopar's Black Door Sill Guards are built to perfectly fit all 2018-2020 4 door Jeep Wrangler JL models.
Fitment: 2018 2019 2020 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
(approx) 30 Minutes
Simple installation for anyone.
What's in the Box
10 More Questions