Maximus-3 Heavy-Duty Recovery Kit with Tow Loops; Red (18-26 Jeep Wrangler JL)Find parts that fit my vehicle

OVERVIEWMaximus-3 JL/JT Recovery Loops are engineered from 3/4" Heavy Duty Steel and mount directly to the Chassis Rail Frame. Giving you secure bolt/pin connection points for any tow bar. Designed to work with a 3/4” D-rings and 7/8" Pins. Made specifically for JL Wrangler/JT Gladiator Steel & Plastic factory front bumpers.

INCLUDES:
2 - RECOVERY LOOPS (3/4" Steel Tab)
HARDWARE MOUNTING KIT

IMPORTANT: MANDATORY FOR FLAT TOWING
IF YOU ARE FLAT TOWING YOUR JEEP BEHIND A MOTORHOME/RV the Towing Tie Rod is MANDATORY FOR SAFETY. The Maximus-3 Towing Tie Rod (PRT # JL1020TR) triangulates your tow bar at the adapters connections preventing the tow-bar arms from spreading outwards in the event of surge break delay or malfunction. The Tie Rod will keep your towing load forces straight into the setup to prevent any side stress loads especially during braking and hard turns.

***WARNING***
Failure to install properly can results in non-warranty damage, property damage, personal injury or death. When flat towing always make sure you regularly check your equipment & pins to ensure all products are secure. Maximus-3 is not responsible for property damage, personal injury or death.

Please note:
Requires cutting of bumper and skid plate.
Towing Tie Rod & Towing Adapters required in order to attach a tow bar – sold separately.

KEY FEATURES & TECHNICAL SPECS
Versatile design to allow for different tow bars
MATERIAL: 3/4" thick steel – Flat Laser, welding
SURFACE FINISH: Red Gloss, Textured Black or 392 Gold Powder Coat
ADDED WEIGHT: 10 Lb. (approx.)
MADE IN: USA

INSTALLATION
Estimated Installation Time: 5 Hours
Installation Difficulty Level: Advanced

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov