(approx) 1 Hour
Simple installation for anyone.
$507.42 (kit)FREE Shipping
This Magnaflow Rockcrawler exhaust is for those of you with the 2012 and up two-door JK that are looking to change up the sound of your Jeep, as well as provide some additional clearance and have less tubing underneath the ride that can get banged up when you're on the rocks. I'm going to give this a one out of three wrenches. All you're going to need to do is remove your factory exhaust system and bolt this one in place. There's no cutting, there's no welding, there's nothing difficult about this install. Give yourself around two hours to get this installed, maybe a little bit less if you don't have any rust on your JK. This system will replace both the factory resonator and the factory muffler with just one smaller bullet-style muffler. So, again, have some additional clearance and tuck up everything out of the way so you have less of a chance of bashing these things on the rocks.As with any exhaust system, this is going to open up your engine a little bit, let it breathe a little bit better. So you might get a little bit better throttle response, a little better MPG, but this is really going to be about the sound. And because this eliminates both the factory resonator and muffler in place of just one smaller muffler, this is going to be one of the louder system on the market. Now, if it had less of a tailpipe dumped in front of the axle, it would be even louder. And this tailpipe system does mellow things out just a little bit. But it gives it a really nice sound, something that I really like.So, again, this is going to replace a couple of components in place of one bullet-style muffler here and you are going to have all of the piping to have your outlet behind the rear axle. The Off-Road Pro System from Magnaflow does dump in front of the axle, that is going to be a little louder and eliminate even more piping. This system overall is by a company that we all know, Magnaflow. They've been making exhausts for a lot time. They make a really high quality product. This is going to be a stainless exhaust system. Everything fits together really well. You can tell by the bends, by the welds, that this is a very well-built system out of a very high quality material. But all of that also means it's going to be a little bit more expensive that some of the others on the market. If you have the budget for it, you'll like the way this sounds. I think it's going to be a nice option.As far as the install goes, I am going to give this a one out of three wrenches. The most difficult thing you're going to run into is going to be any sort of rust that you might have on that factory exhaust system. So I definitely recommend spraying all of the clamps, all of the nuts, bolts, and even the hangers with a good penetrating oil well before you get started with this installation. It's going to make it that much easier to take everything apart.So you can start from the back removing your muffle, then removing the rest of the piping and resonator from the catalytic converter collectors all the way back. Get everything out of the way. Then when installing this system, you're going to actually start at the front by the cats, installing this small extension pipe here, then the muffler, then your over-axle pipe, and finally your outlet tailpipe section. This system does come with all the clamps that you're going to need to get it installed on the Jeep.Give yourself around two hours to get this installed, maybe a little bit less if you don't have any rust on your JK. And with some traditional hand tools, you can get this done in your driveway.With Magnaflow you are going to be paying a little bit more for quality of materials and quality of construction. And this system comes in at right around $460, which is going to be the higher end of the price range for an exhaust system like this. But, again, I think it gives you really great sound, it gives you functionality of having less piping, less stuff to get banged up on the trail. So if you're looking for something that you can take off road, give you some sound, I think that this is a really nice option. And it's a very high build quality as long as you have the budget for it.So if you're looking for more growl and to have less stuff to get banged up on the rocks, I definitely recommend taking a look at this Magnaflow Rockcrawler exhaust system for your 2012 and up JK that you can find right here at extremeterrain.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Performance. Enhance your engine's overall performance with the Magnaflow Rockcrawler Exhaust. It helps reduce engine heat and backpressure while improving horsepower and torque gains. This exhaust has a high-clearance Rockcrawler design for superior off-roading.
Design. It is mandrel bent and made of strong stainless steel for durability. Its fully-welded tubing adds to the strength.
Fitment. This exhaust fits 2012-2018 Jeep Wrangler JK 2-door models.
Note: Coupon codes cannot be applied to this product.
Fitment: 2012 2013 2014 2015 2016 2017 2018 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
February 18, 2020
Install was easy. Got the existing off in 20 minutes and took another 20 to install the new one. Sounds great on startup with a really nice note when accelerating. There is a drone but it’s nothing too loud. The crackle when shifting gears is great. Not too many miles on it yet but it feels like I get a bit better acceleration and my mpg has gone up a tick. Also, getting rid of the stock muffler gives the back of the Jeep a much cleaner look.Helpful (0)
July 14, 2019Helpful (1)
July 08, 2019
Showed up on time with no damage to the packaging! Installed on 2017 JKUR. Removing factory exhaust was the hardest. I ended up using a saw to cut the pipe out in easy to maneuver chunks, and a cut off wheel to slice the nipple of the exhaust hangers and pull them out. Install on the Magnaflow was really nice. Everything fit just right and had all the correct hardware. After all said and done, there are no rattles, plenty of clearance around everything, and the sound is awesome. Nice low rumble at idle and while on the trails. Gets good and noisy when you put the hammer down getting on the highway, or passing. Clearance wheeling is great also. Flexed out on the rocks there was plenty of clearance for suspension. Thumbs upHelpful (2)
June 17, 2019
This exhaust rocks!
Installed the Magnaflow Rock Crawler Cat-Back Exhaust two weeks ago and couldn't be happier. The install was easy and the sound is fantastic. If you are looking for something with a little more rumble, but not too loud, this is the ticket. Fairly quiet at idle and at cruising speeds. Nice sound when on throttle. I can also feel a tangible performance improvement at higher RPMs. Exactly what I was looking for in an exhaust system.Helpful (1)
June 14, 2019
Bolted on easy, I recommend using torch gun to make it real tight. Great sound, it’s not too loud. Much more clearance on the back end. Great product.Helpful (1)
June 11, 2019
I am glad I chose this exhaust after looking at several types and brands. Not the cheapest, or most expensive system but it was worth the cost and wait. I notice a huge difference in horsepower and the nice low sound is a definite improvement over the cheaper competitors rear exhaust that I had . Professionally installed and an Awesome Mod!Helpful (3)
June 03, 2019
Pretty easy to install with a great sound. Not too loud till you put the peddle down, but you can definitely hear the notes.Helpful (1)
May 31, 2019
First things first, hit ALL of your rubber hangers with bb blaster or wd40 before attempting to remove your old system. It took me 2 hours to remove it bc i didn't do that step. The new exhaust went on in less than 20 minutes, very nice clamps and easy to install piping. After a few heat cycles it got a louder, crackles and pops a little bit between shifts or when going into neutral. Doesnt drone untill you hit 3k rpm, not bad on the highway at all. Feels like the engine breathes a lot better with this pipe and with a cold air intake. Jeep whips doughnuts in the dry nowHelpful (1)
May 12, 2019
Quick and easy install. Sounds great. Took maybe half an hour for me and a friend to put on. Couldn’t be happier.Helpful (1)
March 20, 2019
I love the sound. Really changed the way my Jeep sounds and looks honesty. Cold starts are amazing now. Install took me 5 minutes once I took my old system off. Packaging was solid as well. Use lots of WD-40Helpful (2)
Is this system made specifically for a 2-door model JK or will I still have to cut 20ish inches off like most of them?
Hi, The magnaflow rock crawler cat back is designed for the 2012-2018 jk 2 door models.
Will this fit my 2018 JKU Willy's Wheeler?
Yes, the Magnaflow Rock Crawler Cat-Back Exhaust will be compatible with your 2018 JKU Willy's Wheeler.
How loud is it when Jeep is stripped down?
If there is no interior in your Jeep, it will be a bit louder then normal, but as per our reviews, it has a nice tone that is not obnoxious.
Will I still need exhaust extensions if i get this exhaust with a 3.5 lift?
You would still need the exhaust extension with any lift over 2.5".
Is there one of those I can use for my 2013 4 door wrangler. 3.6
For the JKU item, J100253 is the part number you would need.
This exhaust does not affect any emissions devices on your Jeep, so this would pass a smog inspection in California.
Yes, this exhaust will work with the Magnaflow loop delete y-pipe without an issue.
Yes, the Magnaflow Rock Crawler Cat Back Exhaust will indeed work with the stock bumper so long as you have a 12-18 JK or Rubicon 2 door.
The Magnaflow Rock Crawler Cat-Back Exhaust will work with the stock bumper yes!
The Magnaflow Rockcrawler Exhaust uses 409 stainless steel in the piping and muffler.
(approx) 1 Hour
Simple installation for anyone.