(approx) 1 Hour
Light to Moderate mechanical skill required.
$228.00 (each)FREE Shipping
Features, Description, Reviews, Q&A, Specs & Installation
Adjustable Performance. Center your axle and gain extreme performance with the JKS Front Adjustable Trackbar. Designed for Wranglers equipped with 4 or more inches of suspension lift, this track bar will ensure a solid centered axle to keep your Jeep on track both on and off road. This bar is fully adjustable and allows for fine adjustments of 1/16 of an inch for perfected geometry.
Rugged Construction. This adjustable front track bar is crafted from strong 1.25 in diameter, .25 inch thick DOM steel tubing for extreme rigid strength. It is zinc plated and finished in a durable black powder coat designed to prevent corrosion and rust. Each bar is equipped with a urethane spherical bushing for unrestricted travel and a premium rubber bushing to provide quiet and comfortable ride.
Installation and Warranty. This front adjustable track bar includes the necessary hardware for installation in moments. Each bar is backed by JKS with a Lifetime Limited Warranty and is fully serviceable providing complete reliability and continued performance.
Application. The JKS Front Adjustable Track bar is specifically designed for use on 1997 to 2006 Jeep Wrangler TJ models equipped with at least 4 inches of suspension lift.
Fitment: 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
July 13, 2019
Front Adjustable Trackbar , nice and heavy duty big improvement for my TJ easy to put on just follow the instructions drilling the one hole larger was a peace of cake , JKS parts are awesome...Helpful (1)
May 08, 2019
Great and easily adjustable
The JKS trackbar is reatively easy to adjust and works great with my lift. It was also nice to not need the relocation bracket because of the adjustability. It’s a bit more than others but its way beefier than stock. An excellent choice for any lift.Helpful (1)
April 12, 2019
Heavy duty but very poor packaging
Glad I chose this over some of the others. I’d have given 5 stars but the shipping package for such a heavy item sucked and came torn open on one end exposing the grease fitting which got bent and scraped badly along with scratching up shaft itself. Didn’t have time to send it back but it still worked great. Not the first item I’ve gotten from ET that has come in badly Damaged boxes with parts hanging out.Helpful (1)
February 28, 2019
Would Highly Recommend
Still had stock track bar with 3 inch lift big improvment afterwards . Also glad It Got Rid of the tie rod end . You will have to drill but worth it .Helpful (1)
February 02, 2019
Great heavy duty track bar.
Big upgrade over stock. Heim joints are heavy duty and was a pretty easy install. Definitely will buy jks againHelpful (4)
December 12, 2018
Good heavy duty track bar. Needed to go buy a 9/16 drill bit to install it. Happy with the purchaseHelpful (6)
October 01, 2018
High quality replacement trackbar
This JKS trackbar is a big jump in quality and strength from the OEM bar and well worth the extra money. The frame side mount does require drilling out the tapered hole to 9/16" to fit the larger diameter mounting bolt for the upgraded pivot rod end. This will permanently modify the Jeep to not permit the stock bar to be reinstalled. I highly recommend this anyway due to the quality upgrade. Be sure to check all of your steering and ball joint systems for play and looseness to tighten your suspension and provide a safer vehicle to operate. Pros: - High quality upgrade with significantly more strength - This is the primary component to induce steering oscillation (death wabble) and is fixed with this part - Adjustable to fit small adjustments in height (larger tires, body lifts, small suspension upgrades) - Easy to install (3 of 5 wrenches difficulty) Cons - Must modify the vehicle permenantly - Adjustable locking nut does not stay tight and disengages on first test ride. Must use Locktite to secure nut - The axle mount side does not include a new replacement bolt. This bolt is a known issue on the Wranglers and should be replaced with a non-tapered shank bolt that is grade-8. A trip to the hardware store is highly advisable when upgrading this component.Helpful (7)
August 23, 2018
best deal for a front trac bar!
perfect fit, tougher material. i love this trac bar and im about to get the real as well!Helpful (7)
July 23, 2018
so far so good
i had extreme death wobble and was able to alleviate with the track bar and steering stabilizerHelpful (8)
June 20, 2018
No more death wobble!
Added a 4" lift with 35"x12.5"x17"...... Got the death wobble..... had a worn original track bar..... replaced with JKS adjustable Trackbar..... This is a beast compared to the original..... Go to go!Helpful (8)
Is this Trac bar adjustable while installed, or will one end need to be unbolted to adjust?
This will need one end unbolted to adjust.
I have a 2" teraflex leveling kit on the front of 1998 TJ. And I plan on 3" lift kit in the future. Is this trackbar ok to use ?
This track bar is designed for total lifts from 1"-3.5" .
I have an issue with my RE adjustable track bar where it slaps the top of the diff cover upon compression at certain angles. Does this track clear the diff when the suspension is compressed? It appears as if it is bent to clear it, but I want to make sure before I purchase it.
This track bar is designed to clear the differential when compressed, when installed and aligned correctly.
the hole on the bracket on frame is worn do you need to drill a larger hole for this trackbar
Using a 9/16" drill brit you will need to enlarge the tapered mounting hole in the chassis rail bracket on the driver side.
hello i baught JKS FRONT ADJUSTABLE TRACKBAR FOR 1-3.5 IN. LIFT (97-06 WRANGLER TJ) a few months ago and i have now noticed that the driver side of the track bar is not longer in the neutral position.. it is angled down toward the ground toward the front of the jeep. any reason this could happen and what i should do?
The JKS Front Adjustable Trackbar may need to be loosened and have the driver side re- clocked in order to provide a neutral position at normal ride height.
Both of these trackbars would work with your 2.5 inch lift kit, one would not be better than the other since they both would work for your specific lift size.
(approx) 1 Hour
Light to Moderate mechanical skill required.
What's in the Box