Front Axle Controm Arm Mount Frame Rust Repair Kit (97-06 Jeep Wrangler TJ)Find parts that fit my vehicle

EACH KIT DOES ONE FRAME RAIL, EITHER DRIVER OR PASSENGER SIDE.   Similar to our P0925 kit, this kit is for when you are not going to remove the upper and lower control arm mounts.  Repair the rusted area of your TJs frame with this rust repair kit for the front axle control arm mount areas on your TJs frame.  This is the area just in front of the transfer case skid plate where the lower control arms for the front axle mount to the frame.   Kit includes 10 ga frame plates for the outside, inside and bottom of the frame.   Also include are small tie in plates for around the body mounts and plates to help tie in the front of the lower control arm mount. Kit does not require the lower control arm mount be removed.  Kit lays over the existing mount allowing for a large amount of tie in of the control arm mount to the kit.  Kit works for either driver or passenger side.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov