Rear Frame Controm Arm Area Rust Repair Kit (97-06 Jeep Wrangler TJ)Find parts that fit my vehicle

EACH KIT DOES ONE FRAME RAIL, EITHER DRIVER OR PASSENGER SIDE.   KIT REPLACES BOTH THE UPPER AND LOWER CONTROL ARM MOUNTS Repair the most common rusted area of your TJs frame with this rust repair kit for the rear control arm mount areas on your TJs frame.  This is the area just behind the transfer case skid plate.   Kit includes 10 ga frame plates for the outside, inside and bottom of the frame, as well as new heavier duty 7ga parts to completely replace the inside control arm mount and .25" thick parts to replace the lower control arm mount.  Design allows the frame plates to be welded inside and out. Kit works for either driver or passenger side.  The P0534 kit includes both the frame repair, the upper control arm mount, and the lower control arm mount.  If you only need the upper control arm mount see our P0680 kit.   If your only looking for the lower control arm mount see our P0715 kit.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov