How to Install Hyline Offroad 50 inch LED Light Bar Mount on your Wrangler

Light Bar Mount Installation

Step 1— Using Torx Socket remove the 3 bolts in each windshield pillar (See Figure 1). You will NOT be re-using this original hardware.

Step 2 — Install both brackets with one rubber liner behind each to protect the vehicle's painted surface and fasten using supplied 5/16" x 1" hardware. DO NOT TIGHTEN.

Step 3 — Now install your Light Bar between both brackets. With the mounting bracket hardware still loose you can run the light wiring behind the brackets. This is only one option for running wires. It is your decision to run wiring in any other way.

Step 4 — After wiring is run you can tighten the hardware and light bar hardware appropriately.