- (1) Roll Bar Cover Kit
Free Shipping on Orders Over $75. Details
These Dirty Dog 4x4 roll bar covers in black are for those of you who have a 2007 and up four-door JK, and are looking to replace those factory roll bar covers. Whether you purchased your Jeep from someone else who removed the roll bar covers and you don't have a set at all, or yours are just starting to look a little bit haggard, a little bit faded. Replacing them will definitely freshen up and renew the interior look of your JK, whether you're looking at it from the inside or from the outside when the top is down. Now, these are going to be a more expensive set of roll bar covers than you can get from some of the other aftermarket companies. However, these are going to be very high-quality. From the zippers to the stitching, the material itself, these are going to be one of the best built roll bar cover sets that you can find. These covers are made in a polyester material, very similar to the factory material. They're going to be water, mildew, and UV fade-resistant. They are completely dyed through and through to ensure that the color is not going to rub off and you're going to be able to resist fading as much as possible out in the sun. The install for these is going to be a pretty easy one out of three-wrench install. Although, you will have to do a little bit of disassembly of your Jeep to get these installed. You'll have to remove your factory sound bar, and also your map light. Then, you can just go ahead and unzip and unclip your factory roll bar covers. Now, if you don't plan on reusing your roll bar covers, if they're just going to go in the trash, you can just cut around your seat belts on your roll cage. If you do want to hang on to those factory covers, you are also going to have to remove the seat belts from the sport cage before you can finish your disassembly and reassembly. So once you have all of those factory covers completely removed, you can go ahead and install these ones. Again, the process is going to be pretty simple. There are just some zippers and some snaps that are going to hold everything in place, and this is something you can do aside from the disassembly without any types of tools. A set of these covers runs around $280 which, like I said, is more than a lot of the other aftermarket ones that you can find, and more by about double. So if you're looking for something that's very high-quality, going to hold up really well, fit really well, and look really nice, and you have a higher budget, I definitely recommend taking a look at these. I think that they are truly better built than a lot of the other ones out there. However, if you are looking for something a little bit more budget-friendly, we have those options as well. So if you're looking for a very high-quality set of replacement roll bar covers, I definitely recommend taking a look at these from Dirty Dog 4x4 that you can find right here at extremeterrain.com.
Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Details
CA Residents: Warning: California's Proposition 65
Installation Time: (approx) 30 Minutes
Difficulty Level:Simple installation for anyone
No questions about this product yet.Ask the First Question
May 31, 2018
Not ideal for the JL
This item didn't appear to work on the JL very well. Also, I use a spiderweb sun cloth cover and the pads are not compatible with that cover.
Bang for your Buck 3
May 01, 2018
Did not fit 2018 JLU Sport S
Called and asked prior to order / purchase. Rec'd and finally gave up took to Jeep parts/service. Would not fit the JLU changes. Had to return. Return was simple and painless. Wish the original CSR was aware that the JK and JL are 2 different animals.
Bang for your Buck 5
April 27, 2018
Roll bar covers
Roll bar covers are made of quality materials but they do not fit the 2018 JL as described so had to return.
Bang for your Buck 5
April 19, 2018
Doesn’t fit the wrangler jl body as a heads up to everyone
Bang for your Buck 4