Centerforce Dual Friction Organic/Carbon Clutch Kit with 8-Bolt Flywheel; 10-Spline (12-18 3.6L Jeep Wrangler JK)

Increase Holding Capacity. The Centerforce Dual Friction System gives you a clutch that peaks your performance both off-road and on the street. With its high inertia steel flywheel, this Centerforce Dual Friction Clutch Kit increases your off-road capabilities without sacrificing your street ride, pedal effort or driver control, bringing you the best of both worlds. Upgrading your 3.6L JK to this clutch kit will deliver up to a 90 percent increase in holding capacity over your stock setup.

Durability. For Jeep JK owners who use oversized tires, clutch replacement used to happen way too often. Not with the Centerforce Dual Friction kit. The durability of the high-inertia steel flywheel was built for the wear and tear of off-road adventures. This 10-spline clutch featuring a 1-1/8" input shaft diameter and 10.75" disc diameter will provide you with smooth engagement and high performance all at the same time.

Installation. The Centerforce Dual Friction Clutch Kit includes a steel flywheel, pressure plate, dual friction disc, pilot bearing, throwout bearing, bolts and alignment tool. We recommend having a reputable shop install this clutch kit if you do not have much experience working on the drivetrain of your Wrangler.

Application. The Centerforce Dual Friction Clutch and Steel Flywheel Kit is designed to fit 2012-2018 3.6L Jeep Wrangler JK models.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov