ExtremeTerrain is proud to offer FREE SHIPPING on any order over $119!
Free 2-3 Day Delivery on most items, see Product Page for details.
Free Shipping Offers are for Standard Ground Delivery Service and are only valid for shipping addresses within the 48 contiguous United States. Truck freight and oversize charges still apply unless otherwise noted, and can only be shipped to the lower 48 States. Tires, Wheel and Tire Kits, and certain large items do not qualify for free shipping.
Shipping to Alaska and Hawaii will require an additional charge.
Justin: The Cali Raised LED Sequential Side Mirror Lights that we have here today will be a small, but impactful modification for all 2016 and newer Tacoma owners who might be looking to add a little bit of customization to an often-forgotten-about area. Now, the markers themselves will feature a dark, smoke lens, of course, loaded with the bright amber LEDs that will sequence whenever your turn signals or your hazards have been switched on, all for right around that $100 price point for the pair.So, again, this is going to be a small, but cool mod that isn't terribly expensive overall and will definitely increase the impact of your mirror-mounted signal markers. Now, at first glance, guys, the Cali Raised options are going to be very similar to that of your factory markers, of course, minus that dark, smoked, aggressive lens. However, once the signals or hazards have been fired up, those amber, high-powered LEDs are going to sequence, giving the lights a little bit more character along with a good bit more brightness. In fact, Cali Raised claims these things are going to be three times brighter than that of your factory signals. And that's a claim I do see backed up in the customer review sections. As always, guys, check out some of those customer reviews if you haven't done so already.Now, the housings themselves do feature an OEM quality build with similar materials and, again, are designed to be a direct swap with those factory markers. So, there's really no need for any modification or any extra wiring. Now, the amber LED strip is loaded into that housing before being sealed up, watertight, just to prevent any moisture or condensation from fogging things up over the years. Now, finally, guys, everything, as you guys can see here, is topped off with that dark, smoked, aggressive lens for a more aggressive look, of course, and should flow nicely with other smoked lights that you may have already added to your Tacoma.But now we want to shift gears and show you just what it takes to get the Cali Raised signals in place. And again, very straightforward job, guys, plug-and-play stuff here. Site's going to call it a pretty soft one out of three wrenches on the difficulty meter, and maybe an hour from start to finish at absolute most. But, give you a better idea of what's going on, here is an XT customer. He'll walk you through it now.Man: Really, all you need to install this is Phillips-head screwdriver. First up for this, going to want to just pull off this mirror cap. There's two screws, right here and here. You're just going to want to take those out. So, now that you have those screws out, there's this clip right behind this black piece. You're going to want to unclip that. Now that your light is loose, you're going to want to pick it up, and then unplug this wiring. Now we're going to want to grab the nice Cali Raised LED turn signal. Make sure to plug this in. Now that you have the light plugged in, you're going to throw it right back into that same spot. Make sure all the clips are in. Then you're going to grab your two screws you had before. Now that that's all tight, you're going to grab your cap, and just throw that right back on.Justin: So, wrapping this one up here, again, the Cali Raised Sequential Markers will be a small, but mighty modification that will really make an impact on your '16 and newer Tacoma at home. So, be sure to check out a set for yours right here at extremeterrain.com.
Style and Light Upgrade. These Cali Raised LED Dynamic Sequential Side Mirror Turn Signals will instantly improve the lighting and safety around your Tacoma. Everyone behind you will be able see where you're going higher on your truck. Plus, you get a pretty impressive style upgrade for your Tacoma.
Particulars. The sequential amber LEDs provide 3 times brighter illumination than stock. The smoked lenses and stylish housings enhance your truck's appearance.
Installation. These turn signals go on thanks to a plug and play installation.
Application. These Cali Raised LED Dynamic Sequential Side Mirror Turn Signals fit 2016-2023 Tacomas.
Extended Warranty. ExtremeTerrain/Turn5 Inc. is proud to offer an optional 12 month extended limited warranty to our customers that purchase an eligible product. The program administrator will replace the cost of the covered part of a period of 12 months after the manufacturers warranty elapses, or from the date of purchase if the manufacturer does not offer a warranty.
Coverage. A Covered Part has failed when it can no longer perform the function for which it was originally designed solely because of its condition and not because of the action or inaction of any non-covered parts. The benefits available under this Limited Warranty are strictly provided to you for the replacement of the Covered Part(s) which fails due to a defect.
Notification Sent Via Email. You will receive notification of your enrollment in the extended product warranty program via email within 24 hours of placing your order. Please save this email for possible future reference.
No Deductibles Required. There are no deductibles required for use of this extended product warranty. If your covered part fails within the extended warranty time frame, simply call the program administrator at 1-844-870-4881 for instructions before any repairs or replacements have begun. Additional contact details and instructions will be included in your confirmation email.
WARNING: Cancer and Reproductive Harm - 
