Talk to a Tacoma Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
$20K Sweeps! 10 Chances to Win! Enter Daily >

Cali Raised LED 9-Piece Interior LED Light Kit (16-23 Tacoma)

Item TT8333
Verify parts fit and get product recommendations.
Tacoma Sales Techs: Connect Now M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00
Our Price

$29.99 (kit)

FREE Shipping on orders over $119 Market Price $34.49 You Save 13% ($4.50) Up to 10% off for Military & First Responders! See Details

Will this fit your Vehicle?

Select a different vehicle Help?
Update or Change Vehicle
Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    or use

      Product Videos

      Marideth: If you're struggling to see with the current lighting that you have in your interior and you're looking for an easy solution, this Cali Raised LED 9-Piece Interior LED Light Kit will be a great addition to your 2016 and newer Toyota Tacoma. Now, you probably never noticed that your lighting on the inside of the truck is pretty outdated when it comes to the look and the light that it gives off. Now, these are very small, but these will make a significant improvement with a bright white LED light for each of your interior lights. Now, they will give off a bright white color to offer more of a modernized appearance to your cab area and will have more of a uniform light pattern compared to the halogen incandescent which can be pretty scattered.Now, this kit will include two map lights, one dome light, four vanity mirror lights, and even two license plate lights. So not only will your interior get an upgrade, but your plate will be a lot more visible as well. Now, not only will this be an easy upgrade, but an affordable one as well at right around the $50 mark. Now, when comparing this kit to other choices, other interior lighting may not include everything that you see here. I know it is very tiny on the table. But again, this is going to do a really good job at lighting up the interior and your license plate with these little LEDs that you see. Now, those other choices may include strip lighting that would offer more of styling or personalization to your interior rather than uniform lighting in the factory location. Now, I personally think you can't go wrong with this set for better lighting and a better look for the inside of your Tacoma.Now, install will be pretty easy and the kit will even include the trim removal tool that you need for the install. So, I'm gonna give it a one out of three wrenches on the difficulty meter, taking you no longer than 15 minutes to get the job done. Now, that wraps it up for my review, I'm gonna pass you over to one of our guys in the shop and they're gonna show you how to get this onto your Tacoma at home. So, let's jump into the install.Man: Tools required for this install include the included trim remover tool. What's up, guys? Today we're gonna be installing an LED light kit on our Tacoma. So let's get started. So, our first step is going to be to remove our visor light covers. So, we can flip this down, we're going to get the included pry tool in the kit, pop these covers off, which will give us access to our bulbs. Now, with access to our bulbs, we can pop those out. And we'll do that same thing on the other side.Next, we can go ahead and tackle our map lights. So, we can pry this piece down, this whole piece will release, and then there's a screw holding our bulb in place that we can remove and get our bulb out of there. Now, you can use your pry tool in here, but it's pretty easy just to get in there with your hands. So, now with this panel dropped down, we can unscrew our bulbs here and then we can just wiggle our bulb out of place. So, now we can go ahead and remove our dome light. So, we're going to be prying on the front-most side of it. Now, once we have access to our bulb, we can just pop that out.So, now coming to the back of the truck, we can remove our license plate lights. Now, I'm going to get my hand up under here and push from the backside and it'll pop our little pod right out. So, this is going to be right on the inside of the bumper. And we can just push that right through. So, now we can pull our pod out. We're going to be twisting counterclockwise on our connector to release our bulb. And then we can just wiggle our bulb out of place. And we'll do that same thing on the other side. So, now we can install our new map lights. So, we're going to take that screw that we took out earlier and then we'll have the bulb with the circular head that'll go in here and then we can screw it into the back.And now with our LED bulbs installed, we can press this back up into position. So, now we can install our LEDs for our visor. So, we can just line these up and press them into place. And these are going to be the long, skinny bulbs in the kit. Press that one in. And now we can reinstall our covers. So, these are going to slide up and then press in. And then we can do the same thing on the other side.So, now for our dome light, we're going to be sliding the post on this side in first. This one bends back a little, so you have some adjustment. And then we can pop our cover back on, slide those tabs into the grooves, and then click it into place.So, now for our license plate lights, we're going to grab our harness. We'll be using the bulb with the circular head once again, and we can just slide that in. And then we'll slide it back into our housing, and then we'll turn that one clockwise to lock it into place. Slide it in until we hear that click and then repeat the same thing on the other side.So, that'll wrap up this review and install of the Cali Raised LED 9-Piece Interior LED Light Kit for your 2016 to current Tacoma. Thank you for watching, and remember for all things Tacoma, keep it right here at extremeterrain.com.

      Product Information

      Features, Description, Reviews, Q&A, Specs & Installation

      Features

      • Interior LED Light Kit
      • Improves Lighting and Appearance
      • Uniform Light Distribution
      • Nine Piece Kit
      • Includes: 2 Map, 1 Dome, 4 Vanity Mirror, 2 License Plate Lights
      • Simple Plug and Play Installation
      • Fits 2016-2023 Toyota Tacoma Models

      Description

      Interior Lighting Upgrade. If your Tacoma's interior is poorly lit making hard to find things at night you should upgrade to a Cali Raised LED 9-Piece Interior LED Light Kit. The factory incandescent bulbs are weak with poor output, but the bulbs included in this 9-Piece Kit feature 6000K White 5050 Series LED Chips for brighter, more uniformed light distribution.

      Kit Includes. This Cali Raised LED 9-Piece Interior LED Light Kit comes complete and includes (2) Map Bulbs, (1) Dome Bulb, (4) Vanity Mirror Bulbs, and (2) License Plate Light Bulbs.

      Plug and Play Installation. Installation of this Cali Raised LED Interior Lighting Kit is 100% plug-and-play. There is no cutting, splicing or resistors required, just replace your factory incandescent bulbs with the ones in the kit. It's that easy! A non-marring installation tool and placement diagram is included.

      Application. This Cali Raised LED 9-Piece Interior LED Light Kit is designed to fit 2016-2023 Toyota Tacoma models.

      Fitment:

      Details

      Cali Raised LED CR2409

      CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

      Installation & What's in the Box

      Installation Info

      What's in the Box

      • (2) Map Bulbs
      • (1) Dome Bulb
      • (4) Vanity Mirror Bulbs
      • (2) License Plate Light Bulbs
      4.9

      Customer Reviews (74)

        Questions & Answers

        10 More Questions

        Will It Fit My Tacoma