C4 Fabrication Overland Series Front Bumper with 30-Inch Light Bar Cutout and Full-Height Bull Bar with Headlight Hoops; Black (24-26 Tacoma TRD Pro, TRD Off-Road)Find parts that fit my vehicle

Extreme Protection with Off-Road Utility. The C4 Fabrication Overland Series Front Bumper with 30-Inch Light Bar Cutout and Full-Height Bull Bar with Headlight Hoops is designed for serious trail duty on your 2024 to 2026 Tacoma TRD Pro or TRD Off-Road. Built for aggressive overland use, this front bumper provides full frontal protection, light bar integration, winch-ready functionality, and rugged styling that complements high-clearance setups.

Construction and Appearance. Built from 3/16-inch laser-cut pickled and oiled (P&O) steel, the bumper's main body delivers uncompromising strength while maintaining a manageable weight. The full-height bull bar is constructed using 1 3/4-inch outer diameter tubing with 1/8-inch wall thickness, while the headlight hoops and gussets use 1 1/2-inch tubing for added protection around the upper corners of the vehicle. With fully welded 3/4-inch thick D-ring tabs and a washer tank skid included, this bumper is both functional and trail-proven. It comes in a raw steel finish and must be painted or powder coated before installation if not ordered with coating. Final weight is 138 pounds with all components installed.

Installation. Installation is moderately difficult and best performed by experienced DIYers or professionals. The bumper mounts to factory points and includes a winch controller relocation kit. Cutting of factory plastics may be necessary depending on your vehicle's configuration.

Application. This C4 Fabrication Overland Series Front Bumper with 30-Inch Light Bar Cutout and Full-Height Bull Bar with Headlight Hoops fits 2024 to 2026 Toyota Tacoma TRD Pro and TRD Off-Road models.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov