(approx) 2 Hours
Simple installation for anyone.
$174.99 (pair)FREE Shipping
Open Box from $46.07
Hey, guys. It's Sara from extremeterrain.com. And today we have a review install of the Barricade HC Running Boards, fitting your '18 and newer two-door Jeep Wrangler JLs. These running boards provide a secure stepping surface in all-weather with their rugged non-slip step pads. These running boards feature mild steel construction with a textured black powder coat finish, as well as plastic end caps and the non-slip step pad.Now you do want to keep in mind because of the way these mount to your Jeep, they're not gonna provide as much protection as say a rock slider would, but if you're just trying to add a nice wide step to your Jeep, these are an excellent choice. Coming in at around $175, these are a budget-friendly way to add a step to your Jeep, especially if it's lifted.I'm giving this install a one out of three wrenches on the difficulty meter, can be done in approximately two hours and features a direct bolt-up install. All right, with that said, let's jump right into our install. For this install, we used a 13-millimeter wrench, small extension, a 5-millimeter Allen socket, 13-millimeter socket, a ratchet, and an impact gun.So the first step in our install is to get our brackets bolted up to the side and bottom of our Jeep. Line up the holes in the front of the bracket to the holes in the pinch weld here. And with the included hardware, get these started. There is a good amount of adjustability in this bracket, so we are gonna leave this hardware hand tight for now until we get the bolt in the underside of our Jeep. Repeat that process with the second bracket.Remember, we're leaving this hardware hand tight so we can get the bolts in the underside of our Jeep. Line up the opening in the bracket with the threaded hole on your Jeep and thread in the bolt. Grab a 13-millimeter socket and tighten this down. Grab a 13-millimeter wrench and a 5-millimeter Allen key and tighten these down. Repeat that with the other bracket. Grab a 13-millimeter socket and tighten this down. Grab your 5-millimeter Allen key and 13-millimeter wrench and tighten these down.At this point, we can grab our step and set it onto our brackets. Now there is quite a bit of adjustability here back and forth, so go ahead and take a step back, line up where you'd like it on your Jeep before you bolt it down. Slide your bracket into the running board and line it up with the bracket that you've already installed on the Jeep.Slide the nut over top of the plate and line up your hardware through the bracket and thread it together. Grab your 13-millimeter socket and tighten it down. Repeat that process for the second bracket. Grab your 13-millimeter socket and tighten this down. All right, so that's gonna do it for the review and install of our Barricade Running Boards. Remember for all things Jeep, keep it at extremeterrain.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Built for Your Safety. Not everyone can easily climb in and out of an off-road monster like your Wrangler, which is why you need to install a pair of Barricade HD Running Boards. These Running Boards are designed with a wide stepping surface capable of accommodating feet of different sizes. Non-slip step pads offer superior gripping power, ensuring you and your passengers get a firm foothold. In addition to providing a safe stepping area, these running boards can also protect the sides of your Wrangler from road and trail debris.
Mild Steel Construction. These Barricade Off-Road HD Running Boards are manufactured from high-quality mild steel. This mild steel construction offers a high level of strength and durability allowing these Running Boards to handle heavy loads and punishment. To protect these HD Running Boards from oxidation and corrosion, Barricade applies a textured black powder coated finish that also adds to your Wranglers rugged good looks. As part of the final assembly Barricade installs a set of non-slip step pads.
Simple, Bolt-on Installation. Barricade Off-Road engineered their Running Boards to be a direct bolt-on upgrade using just basic hand tools, so there is no drilling or cutting required for a clean straight forward install. All of the necessary hardware is included for installation, making this an easy job for anyone to complete in under two hours.
Application. These Barricade Off-Road HD Running Boards fit 2018-2020 Jeep Wrangler JL 2 Door models. Driver and passenger side included.
Fitment: 2018 2019 2020 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
December 04, 2019
Love these running boards and very easy to installHelpful (0)
November 29, 2019
Love my new running boards!
I recently bought my Wrangler without running boards. We ordered the Barricade HD Running Boards and they are great quality and look fantastic! And they were easy to installHelpful (0)
October 06, 2019
Great running boards
Some of the hardware appears to be stainless steel, but not all of it. Wish they would have supplied all stainless steel. Otherwise it was an easy install and I'm very pleased.Helpful (0)
September 29, 2019
Great HD Running Boards
These running boards were not only easy to install, all factory holes fit perfect with plenty of hardware that was shipped. It was even shipped to Germany and arrived in perfect condition. This just shows their durability. The boards just give such a great look to the Wrangler that ties in the fenders and adds so much to the exterior.Helpful (0)
September 29, 2019
Nice Step Boards
These steps boards are very easy to install and give a nice look to my Jeep. It took me less than 45 minutes to install them by myself.Helpful (0)
September 24, 2019
Great upgrade at a great price!
Hubby installed within an hour. Great upgrade at a great price! Highly recommend this running board. Good quality, and cost is so much less than purchasing through a dealership.Helpful (0)
September 05, 2019
Didn’t have to wait on hubby! I had installed within 30 minutes. Only negative is I wish they came out further but that’s on me and lack of research. All in all, looks good.Helpful (1)
August 31, 2019
Looks good but installation manual not clear.
The running board looks good but the installation is not clear. especially on the last part on placing the running board.Helpful (2)
August 25, 2019
Nice step for the price
Directions for installation not too bad, but confusing because the send extra brackets you don't need - maybe for a 4 door. I didn't use many of the nuts and bolts supplied - I used stainless steel to avoid rust issues.Helpful (2)
My Rubicon came with Rock Rails already installed. Can these be added on the to rock rails?
These steps can not be installed in conjunction with the factory Rubicon rock rails.
Is this a straight bolt on (i.e. no drilling or cutting required) Running Board?
It is a direct bolt-on install, no drilling or cutting is required.
(approx) 2 Hours
Simple installation for anyone.
What's in the Box