Guaranteed Free Delivery by 12/24! available on most items - Details

Talk to Wrangler Enthusiasts
1-877-870-8556
Everyday 8:30AM EST - 11:00PM EST
Win $3,000 For Your Wrangler Enter Daily

Axial LED Fog Lights (07-18 Jeep Wrangler JK)

ExtremeTerrain no longer carries the Axial LED Fog Lights (07-18 Jeep Wrangler JK). Please check out 2007-2018 JK Jeep Wrangler Parking & Fog Lights for an updated selection.
This item currently can not be added to your cart. Please try again later.

Features, Video & Details

  • Bumper Mounted 4" LED Fog Lights
  • Improves Visibility and Appearance
  • Premium High-Output CREE LED Technology
  • 6000K Cool White Color Temperature
  • Rated at 1020LM
  • Clear Polycarbonate Lenses with Black Die-cast Aluminum Housings
  • DOT and SAE Certified
  • Water Proof Rating of IP65
  • Sold as a Pair – Includes Driver and Passenger Side
  • Plug and Play Installation
  • Designed for Models with Factory Bumper Mounted Fog Lights
  • Will Not Fit 10th Anniversary, or Special Edition Rubicon Bumper
  • Fits 2007-2018 Jeep Wrangler JK Models; Excluding 10th Anniversary & Special Edition

Review & Installation Video

Review & Install Video

Superior Performance. Installing a set of Axial 4" LED Fog Lights on your 2007-2018 JK Wrangler will allow you to cut through the densest fog and toughest weather conditions. Designed to be a simple plug and play fog light option for your Jeep, these Axial Fog Lights feature high powered CREE LEDs that will ensure the trail or road ahead is safely lit.

Superior LED Lighting. Featuring premium high output Cree LEDs, these Axial Fog Lights out put 1020 lumens of super bright light. With a 60% average lower power consumption than standard headlights, these LED Fog Lights have a current rate of 0.75 Amps and a power output of 30 Watts to create a life span that last up to 50,000 hours.

Durable Construction. Engineered to out perform the factory fog lights, these Axial Fog Lights feature a rugged, die-cast aluminum housing with a durable, clear polycarbonate lens. To prevent moisture from harming the state of the art electronics found inside, each Fog Light is epoxy sealed. These Axial LED Fog Lights have been designed to take just about anything the trail can throw at them.

Straight Forward Installation. Designed as a straight forward installation, these Axial LED Fog Lights bolt right into the factory mounting location of your stock fog lights. With the included wiring harness adapters (needed for 2007-2010 models) installation can be completed in under 30 minutes. All necessary hardware and wiring extensions are included, along with detailed instructions.

DOT and SAE Certified. These Axial 4" Round LED Fog Lights pass both DOT (U.S. Department of Transportation) certification and SAE (Society of Automotive Engineers) certification requirements making legal for street use. These Axial Lights also feature a dust and waterproof rating of IP 65, which makes them perfect for use on the muddiest of trails.

Application. These Axial 4" LED Fog Lights are designed for use on 2007-2018 Jeep Wrangler JK and JK Unlimited models that are equipped with factory bumper mounted fog lights. Will not fit 10th anniversary, or special edition Rubicon bumper.

Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Details

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

What's in the Box
  • (2) Fog Lights
  • (2) Wiring Adapters
Installation Info
Will it fit my Wrangler?
  • JK Rubicon 2 Door - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18
  • JK Rubicon 4 Door - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18
  • JK Wrangler 2 Door - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18
  • JK Wrangler 4 Door - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18

You Might Also Like

Customer Photos (7) Submit Your Photo

View All 7 Photos

More Products You Might Like

Questions & Answers (6)

5 Top Rated Questions

Hi. Will these fit a 2015 Rubicon Hard Rock edition stock bumper?

  • I apologize, these will not be compatible with the special edition Hard Rock Rubicon model JK bumper. 

Helpful (0)

Will these fit 2013 Moab?

  • Yes, these will fit with your 13 Moab as the only models that will not fit with these lights are the 10th anniversary, or special edition Rubicon bumpers.

Helpful (0)

Has anyone experienced radio reception interference while these are turned on?

  • We have not been informed of any radio interference issues when using the Axial LED Fog Lights, but if you are experiencing something similar, we kindly ask that you please reach out to one of our customer service representatives at 1-844-887-6514.

Helpful (0)

Will these lights fit on your after market bumpers that have cut outs for fog lights?

  • The Axial LED Fog Lights maintain the factory 4" sizing, so they will fit in any bumper that accepts the factory fog light sizing as well.  

Helpful (0)

Will these fit on the back country edition

  • These Axial 4" LED Fog Lights are designed for use on 2007-2018 Jeep Wrangler JK and JK Unlimited models that are equipped with factory bumper mounted fog lights. As long as you do not have theSpecial edition Rubicon bumper or the 10th-anniversary bumper these lights will work.

Helpful (0)
Post Your Question
1 More Question
Will these fit on a 2017 Wrangler 75th Anniversary Edition? 1 answer

Customer Reviews (28) Write a Review

Overall Rating 4

out of 5 stars

Installation Time:Afternoon

Installation Cost:$100-$250

  • Brightness 4.5 4.5
  • Fit 4.535714 4.5
  • Appearance 4.714286 4.7
  • Bang For Your Buck 4.142857 4.1



  • 5/5

    Installation Time: Less than 1 Hour

    August 01, 2018

    Lights for fogs

    Hated it wasnt straight factory harness plug in, but came with pig tail adapters functioned very well and was very bright.

    GarrettA

    Year: 2011Submodel: Wrangler

    Helpful (2)

  • 1/5

    Installation Time: Less than 1 Hour

    June 05, 2018

    Moisture in them after 5 months

    Really liked these for the last 4.5 months, until 2 weeks ago I noticed my passenger lense is holding moisture. Only took them offroading once in the winter, they hadn't seen deep water or mud. Noticed it before I left for a trip up north. Figured I would avoid the cheap garbage from Amazon by shopping at extreme terrain, apparently not.

    Morkman94

    Year: 2011Submodel: Wrangler

    Helpful (2)

  • 5/5

    Installation Time: Afternoon

    May 19, 2018

    jk led fog lights

    I installed these lights in about 4 hours. I have an aftermarket winch bumper and also a Blue Ox tow bar which makes this installation a little more difficult. I had to remove the sway bar to get the lights out and the new ones in. They are very bright compared to the oem lights.

    ParkH

    Year: 2008Submodel: Wrangler

    Helpful (2)

  • 1/5

    Installation Time: Less than 1 Hour

    April 02, 2018

    Axial Fog Lights - Would not work

    Plugged them as instructed. Would not work at all with 2014 Wrangler. Would not attempt to buy again.

    TonyJ

    Year: 2014Submodel: Wrangler

    Helpful (2)

  • 5/5

    Installation Time: Less than 1 Hour

    March 29, 2018

    Axial Led Fog Lights

    Great product. Easy to install. Very sharp looking and provide exceptional lighting above the stock units.

    SL1M

    Year: 2008Submodel: Rubicon

    Helpful (2)

  • 1/5

    Installation Time: Shop Install

    Installation Cost: $100-$250

    March 28, 2018

    Moisture in lights!

    Have to once again remove my winch to change out these fog lights!

    jimmies

    Year: 2011Submodel: Wrangler

    Helpful (2)

  • 2/5

    Installation Time: Full Day

    March 26, 2018

    Not plug and play

    The good: The fog lights are BRIGHT! The bad: The description stated they were plug and play, and in fact came with the plug and play connectors, but this not true. The plug and play adaptor did not fit the OEM connector. So you will have to cut and splice the wires to make the fog lights to work. What should have been an hour install-after removing the front bumper-took several hours to cut, splice, install for the fog lights to work. I bought these headlights for the plug and play ability so I wouldn’t have to cut my OEM wire harness....so not happy about that. Otherwise the lights are bright and instantly turn on. Only two stars for lack of better description online. If they were true plug and play I would have rated 5 stars!

    GregS

    Year: 2016Submodel: Wrangler

    Helpful (4)

  • 2/5

    Installation Time: Less than 1 Hour

    March 24, 2018

    Axial LED fog lights

    Look great, fit great,look great, BUT when on all I get from my radio is static

    Wrangler

    Year: 2009Submodel: Rubicon

    Helpful (4)

  • 4/5

    Installation Time: Afternoon

    March 24, 2018

    Beats OEM lights

    Very happy with the lights. Not so with the adapter cable. Needed to use tie wrap to hold the OEM harness and adapter connectors together. I chose not to cut the OEM connector off and hardwire.

    Bob

    Year: 2017Submodel: Wrangler

    Helpful (2)

  • 4/5

    Installation Time: Less than 1 Hour

    March 22, 2018

    looks great!

    I really like the way these lights look with the new headlights.

    Granitemann

    Year: 2010Submodel: Wrangler

    Helpful (2)

  • 5/5

    Installation Time: Less than 1 Hour

    March 16, 2018

    Fog lights covers

    Perfect match to all other light protectors jeep looks good with all the extras

    JackieS

    Year: 2017Submodel: Wrangler

    Helpful (2)

  • 4/5

    Installation Time: Less than 1 Hour

    March 08, 2018

    Really nice lights, harness is awful

    So these are great lights. Fit perfect and look amazing. They are not plug and play. Wire harness and connectors were just garbage. I cut off all connectors and wired them straight to harness with Mariane grade waterproof connectors. Look and work great. If you are comfortable wiring them yourselves it is worth the 10 min it takes to wire them up. If you don’t want to cut your Jeep factory connectors off by a different brand.

    RobertK

    Year: 2016Submodel: Wrangler

    Helpful (4)

  • 5/5

    Installation Time: Shop Install

    Installation Cost: 0-$100

    March 04, 2018

    Very bright!

    I love these. They were a great purchase for my Jeep. Definitely a safety upgrade you should buy. The difference is night and day!

    Goins2754

    Year: 2009Submodel: Wrangler

    Helpful (3)

  • 5/5

    Installation Time: Less than 1 Hour

    February 27, 2018

    Great lights

    Easy install, very bright. Would definitely recommend them.

    EdwardB

    Year: 2015Submodel: Rubicon

    Helpful (3)

  • 5/5

    Installation Time: Less than 1 Hour

    February 22, 2018

    Bright Addition

    Awesome addition to my ARB bumper.Just what I hoped they would look like. LOVE not being dissatisfied . Thanks as always. Great product for get price!

    Floyd

    Year: 2014Submodel: Wrangler

    Helpful (3)

  • 5/5

    Installation Time: Less than 1 Hour

    February 14, 2018

    great for the price

    good looking lights. pretty bright. had issue with harness. should be plug and play but doesn't get a good connection. I had solder break off while installing. I didn't want to cut factory harness so I used an inline connector. pretty easy install

    GKG

    Year: 2017Submodel: Wrangler

    Helpful (2)

  • 3/5

    February 07, 2018

    More prompts

    Lights are high quality. Wish I would have known I would need a wire harness. Maybe more prompts at time of order would help get everything one needs.

    WMD

    Year: 2008Submodel: Wrangler

    Helpful (2)

  • 3/5

    Installation Time: Less than 1 Hour

    February 05, 2018

    Nice LED fog lights, low quality jumper harnesses

    I installed the Axial LED fog lights in my 2015 JK to match the Axial LED Black Daymaker headlamps. Installation was simple - mechanically the LED fog lights are a plug and play replacement of the OEM fog lamps. The jumper harnesses (2) are of a poor quality - none of them worked. One did not have continuity, the other one was broken (solder joint) when I took it out of the box. The connector that interfaces with the OEM fog light harness connector is soldered to the wires (2 exposed solder joints without any strain relief) - not a reliable mechanical connection. Instead of repairing the jumper harnesses I decided to cut off the connectors on the fog light side and spliced them into the OEM harness. Day and night appearance perfectly matches the Black Daymaker headlamps. The illumination is much better than what is provided by the OEM fog lamps.

    RRt

    Year: 2015Submodel: Wrangler

    Helpful (3)

  • 5/5

    Installation Time: Less than 1 Hour

    February 03, 2018

    Great lights

    Recently purchased new LED headlights. These fog lights match the color and brightness. Perfect fit and super easy install.

    ErikL

    Year: 2007Submodel: Rubicon

    Helpful (2)

  • 5/5

    February 01, 2018

    Axial fog light

    Very bright fog lights I’m really have with the quality and the price tag

    BrianC

    Year: 2007Submodel: Wrangler

    Helpful (4)

Related Wrangler Categories