Up to 35-Inch Tires.
When you want a nice lift for your Jeep, but you do not want to sit too tall, choose the Zone Offroad 4 in. Lift Kit w/ Nitro Shocks. This four-inch lift is a nice touch to your Jeep and will provide you with the quality ride you are after. You will receive a massive 10 inches of wheel travel, better ground clearance, and your lift will accommodate 35-inch tires.
Absorb the Bumpy Terrain.
When you choose the Zone Offroad 4 in. Lift Kit w/ Nitro Shocks, you will be able to enjoy your ride in your Jeep. This kit comes complete with front and rear nitro shocks that will accommodate your Jeep’s new lift and absorb any rough patches or bumpy terrain you may roll over.
No Impact Springs.
The Zone Offroad 4 in. Lift Kit w/ Nitro Shocks comes with front and rear springs included in the kit for your use. You will find that these springs easily replace your factory springs and provide you with the control you need over your Jeep. In addition, you will be impressed with the overall ride quality too.
Smooth and Wobble-Free Ride.
If you are unhappy with where your track bar is currently located, or you need to move it to accommodate the Zone Offroad 4 in. Lift Kit w/ Nitro Shocks, you can. This kit comes complete with a track bar relocation bracket to make the process simple and easy.
Brand-New Kit Contents.
In addition to the quality shocks and springs, you will also receive additional components to upgrade your Jeep to provide you with the best ride. Some of the additional components include bar links, transfer case drop kit, and bump stop extensions.
While the installation of the Zone Offroad 4 in. Lift Kit w/ Nitro Shocks is considered to be relatively easy to moderate in difficulty, it does take about 5 hours to complete. You will find that all parts and hardware needed is included in the kit, for your convenience.Technical Note.
Factory wheels cannot be re-installed due to rear sway bar link interference.
Zone Offroad offers a limited lifetime warranty.
The Zone Offroad 4 in. Lift Kit w/ Nitro Shocks is designed for installation on 2007-2018 Jeep Wrangler JK 2 door models, including Rubicons. Note: 2012-2018 Models may require an exhaust extension kit for installation.
CA Residents: Warning: California's Proposition 65