Westcott Designs 1.50-Inch Front / 1-Inch Rear PreLoad Collar Lift Kit; Raw Aluminum (20-23 Tacoma TRD Pro w/ FOX Suspension)

This is for a Factory Fox TRD PRO, exclusively for the 2020-'23 Tacoma. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory.The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire with out a body chop.*Please note, on 2022 and newer models with the red TRD Upper Control Arms (UCA's), your spring may make contact with the UCA at full droop (extension). This does not effect the performance or function of your suspension at all, just something to be aware of.*This kit provides the following lifts: \n

\n
• 2020-'23 Tacoma: 1.5” (front lift) and 1” (rear lift)
\n

\n[fusion_youtube id="Q3gAqzoZ4Hs" alignment="" width="" height="" autoplay="false" api_params="" hide_on_mobile="small-visibility,medium-visibility,large-visibility" class="" css_id=""][/fusion_youtube]

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov