Review & Install Video
These Raxiom LED Fog Light replacement bulbs are for those of you that have a 2010 and up JK and are looking to swap out the bulbs in your factory fog lights for something that is LED, that's going to be brighter, last longer, and also have a similar color temperature to a lot of the other LED aftermarket lights that you may have already put on your Jeep.
If you've installed LED fog lights or LED auxiliary lights on your Jeep, you'll know that the factory incandescent bulbs in those factory fog lights are going to look very yellow, dim, and dingy in comparison. So upgrading to a set of LED lights like this is going to make them match again in color, and you're also going to get a lot more brightness out of those lights than you would with some incandescent bulbs.
Now, LED bulbs, in general, aren't going to be inexpensive. There's a lot going on here. There's a lot of moving pieces that make a LED bulb that will fit in the same spot as an incandescent bulb and plug right into your factory wire harness and just work. So these are going to be a little bit pricey.
There are gonna be some less expensive bulbs out there, but in my opinion, they're probably not going to last you quite as long and they're not going to have the same color temperature, the same brightness. With these, you may be paying a little bit more, but you are getting something that is very high quality.
So these are gonna be a direct replacement for those factory incandescent bulbs, which means these are an H16 bulb. All that means is that the size, the shape, and the way that this connects to the actual housing is going to be a direct plug-and-play for that other bulb. Now, the installation of this is also going to be very, very easy because of that.
This is going to have two SMD Cree LEDs, which means they are surface-mount LEDs. Right on the board here, you can actually see an LED here, and then there's one on the other side here. So that's where all of your light is going to come from, and these are going to be very, very bright. These are at a 6000 Kelvin color temperature, which, again, is going to match a lot of the other aftermarket LED lights on the market.
It's going to be a bright white, almost bordering on a blue color, which is very similar to a lot of the other LEDs out there if you are looking to match a lot of your other aftermarket accessories. So I do think a lot of you are gonna be really happy with the color that you'll get from these lights.
As far as the install goes, I am gonna give this a one out of three wrenches. You'll probably be able to get this done in about a half an hour or so because you can get these installed without removing your bumper.
Now, you may have to remove the splash shield from the bottom of your bumper, the piece of plastic that goes from the bottom of the bumper over to the crash bar, if you haven't already removed it. But if you already have that removed, if you have an aftermarket bumper in place, you can go ahead and just reach up in there, squeeze the clips to pop the factory bulb out. Of course, unplug it from the factory wiring harness.
You'll pop this into that factory housing without any modification, and plug the other end of this whip into the factory wiring harness, and you're finished. Now, if you did decide to remove your bumper to get these installed, you could certainly do that. It is gonna be a couple more steps, and for most of you, I think you're gonna get these installed with the bumper on the Jeep very simply, and it will save you some time.
A pair of these bulbs is gonna run you right around $120, and I do think that's gonna be a pretty fair price for the quality that you're getting here. I know that there are a ton of bulbs out there that you can get that will fit just like these ones, will fit that are gonna be less expensive, but LEDs can be a little bit finicky.
Again, there is a lot going on here with an LED. There's gonna be a driver, there's cooling mechanisms. There's a lot that happens inside of one of these bulbs, so there is a lot that can go wrong. In my opinion, it makes sense to spend a little bit more on a high-quality light like this one and know it's gonna last you, versus spending a little bit less, saving a couple of dollars upfront, and having to replace them very quickly.
So if you're looking to swap out the incandescent bulbs in your factory fog lights to get a little bit more brightness and also have them match all of your other LED auxiliary lights, I think these are going to be a great option for you from Raxiom. And you can find them right here at extremeterrain.com.
Upgrade to LED Lighting.
Swap out those weak incandescent fog lights that came stock on your 2010-2018 Jeep JK with this Vividline Bulb to LED Conversion Kit. These high powered LEDs replace your H16 bulbs to ensure that the road ahead of you is clearly lit for improved visibility and safer travels.HID Style Lighting.
Vividline LED Conversion Kits produce a brilliant 6000K light that surpasses the color of many expensive HID (High Intensity Discharge) kits for improved vision and impressive styling, all without the high cost or installation hassles. Power Saving SMD Technology.
The bulbs included in this Vividline LED Conversion Kit utilize SMD CREE technology to produce a super bright light while only consuming 1/10th of the power of the stock incandescent bulb. These LED bulbs are rated at over 100,000 hours of continuous use. Easy Plug & Play Installation.
Vividline Bulb to LED Conversion Kits are engineered to be a direct plug-in replacement for the stock bulbs and include the required ballasts and wiring harnesses for a simple hassle free installation. Application.
This Vividline H16 Bulb to LED Conversion Kit is specifically designed for use on 2010-2018 Jeep JK Wranglers with factory equipped fog lights.
CA Residents: Warning: California's Proposition 65
- What's in the Box
- Installation Info
Installation Time: (approx) 20 Minutes
Difficulty Level:Simple installation for anyone
- Will it fit my Wrangler?
- JK Rubicon 2 Door - 10, 11, 12, 13, 14, 15, 16, 17, 18
- JK Rubicon 4 Door - 10, 11, 12, 13, 14, 15, 16, 17, 18
- JK Wrangler 2 Door - 10, 11, 12, 13, 14, 15, 16, 17, 18
- JK Wrangler 4 Door - 10, 11, 12, 13, 14, 15, 16, 17, 18