Enhanced Truck Performance.
Fitting the TeraFlex Rear Trackbar Bracket for 2-3 In. lift on your Wrangler will make it perform optimally. The Rear Trackbar Bracket Lift helps to realign the trackbar to its designated position, thus enhancing drivability. It also works in harmony with other lift components without interfering with your Wrangler’s performance. The rear trackbar bracket reduces tail wag as you drive. As a result, your 2007-2018 Wrangler JK gets improved handling. Designed for heights of 3" and below, the trackbar bracket can be used by spring and budget boost lifts.
Off-roading can be extreme, and you don't want to replace parts frequently. TeraFlex Rear Trackbar Brackets are made from tough aluminum, enabling them to withstand a lot of damaging factors. Furthermore, they have a black powder-coat finishing, which not only protects them from destructive elements like rust, but also gives them an appealing look.
TeraFlex have designed the Rear Trackbar Bracket for simple installation. There is a designated point on the upper trackbar frame on which the bracket should be mounted. The fixing process takes less than 1 hour to complete. Nonetheless, some drilling might be required if you pick another spot to mount the Rear Trackbar Bracket.
TeraFlex prides itself on the high standards of products it manufactures. In regards to quality, TeraFlex has a limited lifetime warranty on the Rear Trackbar Bracket for 2-3 In. lift. This warranty mainly covers material defects, as well as blemishes not recorded during manufacture.
The Rear Trackbar Bracket is designed to be used on any 2007-2018 Wrangler JK.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov