(approx) 10 Minutes
Simple installation for anyone.
$149.99 (each)FREE Shipping
Ryan: The Teraflex HD Hinged Carrier Accessory Mount is for those of you that have a 2007 and up JK that has the Teraflex HD tire carrier installed on it. This is not going to work on your factory tailgate. However, if you have that Teraflex carrier, this is going to give you the ability to very easily mount a Hi-Lift style jack, one of those farm jacks on your Jeep and you can also get an additional piece that will allow you to mount a RotopaX liquid carrier. So for additional fuel, water, whatever you wanna carry, you can also attach that onto this carrier. So you're gonna have a couple of different options there. If you already have that Teraflex tire carrier on your Jeep, this is going to be a very easy piece to install, one out of three wrenches, won't take you more than an hour to complete, definitely bolt-on. And we'll talk about that in just a second.So, even if you have a larger four-door JK, there's not a ton of space on the interior. Even in that cargo area, it can get filled up pretty quickly. So if you're looking to carry things like a farm-style jack for off-road recoveries or additional fluids with you, mounting them on the outside of the vehicle is very nice. It frees up some space on the interior. So having this mount is going to give you a bolt-on way to do that. Now, as with all things Teraflex, this is going to be a very high-quality piece. Fit and finish are all there, engineering is there, but this is going to be a little bit more expensive than some of the other farm jack mounts that you can purchase.This is going to be a piece that is computer designed, CNC cut and bent, powder coated. Everything is done at the highest level, giving you a very high-quality piece. Even though that does drive up the cost a little bit, but if you're somebody who subscribes to the idea that you buy the best possible thing and want to spend a little bit more money once and you don't have to replace it, then this is going to be a great choice for you.This carrier comes in at $100, which I do think is a pretty good deal for the quality that you're getting. If you've already got that hinged tire carrier, you know Teraflex's quality, you know the price that's associated with that quality, and you know that if you spend $100 on this piece, you're only gonna have to purchase it once. It's going to last. Now, I'll have someone from the install team show you how to get this bolted on your Jeep.Man: We'll begin this installation by removing our spare tire, using a 19-millimeter socket. Next, we're gonna use a 12-millimeter socket to loosen this bolt and remove this bolt completely. Next step, we're gonna take our accessory bracket. We're gonna take the long, skinny bolt provided by Teraflex. We're gonna place a washer on there. We're gonna insert that through this backside hole. On the other side, we're gonna use our aluminum spacer. And then, we're gonna insert that through the bolt hole that we removed. So we're gonna get that bolt started. We'll use the 13-millimeter socket to tighten that up slightly. Once you have a little bit of a snug, we'll get the other three bolts in.Next step, we're gonna insert our three stubby Allen-head bolts. So we have one here in the bottom, one in the middle right here, and then we have one here at the top. To tighten these up, we're gonna use an 8-millimeter Allen-head socket. Then, we're gonna use a 13-millimeter to tighten up the new bolt with the spacer. We're gonna use a 12-millimeter to tighten the other bolt up.Now, if you are planning on installing a jack, Teraflex does provide you with the hardware to install. However, we are not gonna install a jack. So next step, we're gonna put our spare tire back on.Ryan: So if you have the Teraflex Hinged Tire Carrier on your Jeep, you're looking for a way to mount some additional accessories, I would definitely recommend this mount. And you can find it right here from extremeterrain.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Construction. Teraflex's hinged carrier accessory mount for your Jeep Wrangler can safely and securely mount a Hi-Lift jack (or RotopaX containers) to the TeraFlex HD hinged tire carrier mount. This bracket is computer designed, laser cut, and precision bent for excellent fitment. A separate RotopaX mount will allow you to mount RotopaX containers to a Hi-lift jack handle. The mount can accommodate spare tires up to 37 inches and also comes with a 1 year warranty
Application. Fits 2007-2018 Wrangler JK models with a TeraFlex HD hinged tire carrier mount installed.
Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
May 04, 2019
No more sag,,,,,
Expensive, but well made addition. The support that a 35in tire requires is achieved with this Teraflex hing. Wish Jeep would had have beefed this area up when they designed the tailgate. Considering the JKs are built to be "Added to".Helpful (3)
April 24, 2019
Took a couple of hours. Easy to do. Went from 31” tires to 35” tires. Much tighter door swing.Helpful (3)
March 21, 2019
Great build quality
I was pleased with the finish and build quality of the Teraflex Accessory mount. The install was straightforward and relatively easy. I did have a fit issue with one of the lower bolts aligning cleanly with the carrier holes. With some contortions and leverage, I was finally able to get this bolt secured. I now have my HiLift/RotoPax as well as a CB antenna mounted to this accessory and it has been rock solid.Helpful (2)
February 22, 2019
Installation was fairly straightforward and took about 30 minutes. Instructions were adequate. Looks good and most importantly it holds my larger wheel and spare tire solidly. I also recently got the teraflex hi lift Jack mount to attach to it and the combo looks cool, keeps the jack outside where it belongs, and saves me from having to open two things when I need to get to stuff in the rear gate area. I recommend it.Helpful (4)
February 19, 2019
Very solid and very easy to install. Jack makes no noise. I do have a rubber isolator on the jack. More expensive than a lot of other mounting options but well worth it.Helpful (4)
January 24, 2019
Solid Accessory Mount
The Tereflex accessory mount is sturdy and very easy to install. Only took me a couple of minutes to complete the installation. My Hi-Lift jack fits perfectly on the mount and looks great. Couple of things to consider; 1: If you plan on installing a CB antenna do not buy the separate CB antenna mount. They use the same holes on the Tereflex hinge. So you can install one or the other but not both. Luckily the accessory mount has a place to easily install the CB antenna so there is no need for the specific CB antenna mount. 2: With my Hi-Lift jack installed, it just barely touches my taillight covers which extend out about a quarter inch from the taillight. I would definitely recommend the accessory mount to compliment your Tereflex hinge.Helpful (5)
December 27, 2018
Nicely built and finished piece. 2 things to be aware of though. Will not hold a 3 gal RotoPax can. 2 gal or less only. Tailgate MUST be fully open when closing rear window. Window clears carrier by 1/4” at best.Helpful (6)
November 29, 2018
Solid, heavy construction.
It is as described, heavy duty, easy install and completes the teraflex tailgate reinforcement package. With the added cb antenna mount, I will now have to purchase a cb as well lolHelpful (7)
November 12, 2018
This is a very well built mount for your jack and CB antenna, if you’re running the JK Alpha HD tire carrier. Very solid, no flex, no wobble, and the design of the mount naturally retains the jack handle so you don’t have to worry about it flopping everywhere making noise. I’m running the 4’ Firestick on a spring as an antenna, and the only downfall I’d say you may run into is the whip slapping against the jack itself from time to time. Oh, and if you have the Teralfex badge installed on the carrier, it will have to be removed. But, as you can see in the pictures, it can be reutilized on the accessory mount.Helpful (6)
October 28, 2018
Simple install and very robust
Simple and easy to install, very solid part, works well and provide great functionalityHelpful (6)
Does this have an antenna mount? It appears like it might from the picture, but the description doesn't mention it.
Hello, yes, this does have a CB antenna mount.
Will this mount Home just a high lift jack? Or will it mount to any trail jack.
This mount can hold a Hi-Lift jack, or similar model or Rotopax containers.
Will this item fit a Mopar HD carrier? as they appear to be identical.
The Teraflex HD Hinged Carrier Accessory Mount is intended for use with the TeraFlex HD Hinged Tire Carrier Mount only.
Will this mount to other HD tire carrier's such as Smittybilt 2843 , Rugged Ridge Spartacus ?
The Teraflex HD Hinged Carrier Accessory Mount is intended for use only with the TeraFlex HD hinged tire carrier mount.
Is it possible to mount a rotopax pack mount to this accessory mount without a hi-lift Jack ?
The Teraflex HD Hinged Carrier Accessory Mount is not designed for mounting Rotopax, and would require modification to do so.
The Teraflex HD Hinged Carrier Accessory Mount can fit one Rotopax 2 gallon unit and still easily clear the tail light.
The Teraflex HD Hinged Carrier Accessory Mount can hold a jerry can holder, but they may need minor modification or custom brackets to allow secure mounting.
No, this mount is designed specifically for the TeraFlex HD Hinged Carrier. It will not install on a stock JK without the carrier.
(approx) 10 Minutes
Simple installation for anyone.
What's in the Box