Talk to a Tacoma Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
$20K Sweeps! 10 Chances to Win! Enter Daily >

Soft Tri-Fold Tonneau Cover (16-23 Tacoma)

Item TT8456
Verify parts fit and get product recommendations.
Tacoma Sales Techs: Connect Now M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00
Our Price

$269.99

FREE Shipping + $40.00 Oversized Item Fee Market Price $311.99 You Save 13% ($42.00) Up to 10% off for Military & First Responders! See Details

Open Box from $83.70

Will this fit your Vehicle?

Select a different vehicle Help?
Update or Change Vehicle
Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
Recommended Install Shops
How It Works
Install Shops are available near Ashburn - 20149

Add Local Shop Installation

Total cost of service $129.00
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    or use

      Product Videos

      Hey, guys. It's Sara with extremeterrain.com, and today we have a review and install of the soft tri-fold tonneau cover fitting your '16 and newer Toyota Tacoma. This is perfect for the Tacoma owner who's looking for a budget-friendly way to protect their bed from the elements and wants a soft tri-fold tonneau cover that folds away quickly and easily giving them bed access in seconds. This softcover is constructed from soft leather grain black vinyl fabric with a lightweight 6061 aluminum frame. This tri-fold tonneau cover features a quick clamp fastening system so you can open and close this tonneau in seconds. It also secures at the front of your bed with elastic straps, so you can drive your Tacoma with this cover open or closed. So I did want to note this will not protect from theft as well as a hardcover would, it's not gonna pass the knife test. However, if you're looking for a simple and budget-friendly way to protect your bed from the elements, this is an excellent choice. Now, to operate this tonneau cover, drop your tailgate. Release the clamps on either side and secure them in the cover.Fold it all the way back and secure it with the elastic. Make sure you do that on both sides. Now, to fold it back out, do the exact same thing in reverse. Unhook both of the elastics on either side. Fold your tonneau back out and secure it at the back. Slide the plastic cover backwards. Line up your clamp and clamp it down. And the same thing on the other side. Once the clamps are attached to both sides, you can go ahead and shut your tailgate. So as far as price goes, this cover comes in at around $250 making it one of the most budget-friendly softcover options available for your Tacoma. And for your money, you're getting a durable softcover option that opens and closes in seconds and will save you some money over more pricey options. And as far as the install goes, I'm giving this one a one out of three wrenches on the difficulty meter. It does feature a direct bolt-up install that can be done within one hour. So with that said, let's check out that install.For this install, you will need a ratchet and a 17-millimeter socket. So the first step in our install is to grab your tonneau and set it at the front of your bed. You may want a friend for this step just to help you line it up. So now, we're underneath the tonneau cover and we're gonna install the brackets for the two front clamps here. Now, these brackets on the tonneau cover are movable, so you can move them to the location that you'd like. We do need to put brackets in this rail here. So what we're gonna do is press on this plastic tab at the end and remove this cap. We're going to reinstall it in a minute. And they've included several brackets that slide in this opening. Go ahead and install two of these and slide them to match each of the brackets on the cover. Now, you can reinstall this plastic end cap. And next up what we're gonna do is line up these brackets over top of each of those that we just installed. Using the included hardware, you have a hex bolt and a washer, as well as a lock washer, go ahead and thread it in. Now, there is quite a bit of adjustability here, so keep that in mind. We are going to tighten this down but if you need to adjust these at all, you do have that option. Grab a 17-millimeter socket, tighten it down. Repeat that for the second bracket.Go ahead and tighten it down. Then what we're gonna do once this is fully installed, we're gonna line up this opening with the bracket that we just installed. Then go ahead and slide it in place. And once it is fully installed, go ahead and tighten it down. We may need to loosen up this bracket to get it fully installed. And if you do so, with a wrench, you can go ahead and tighten that back down. And repeat that with the other bracket. And make sure both of these knobs are tightened down and the tonneau is tight to your bed rails. And now that these are both tight, we can move on to the rear. And now that it's folded up upfront, we can fold the tonneau out and attach it at the back. Now that we're sure it lines up properly on the bed, what we're gonna do is release this clamp here, push back on this plastic cover and the clamp should come out. Now, it is adjustable back and forth but not side to side. So what we're gonna do is close it back down. Make a note of where this clamp falls. And then we can install our bracket right behind it. Now, the same as the front side, we're gonna press down on this plastic tab and remove this cover so that we can slide two of these brackets down the line.Replace this plastic cover. We're gonna use that as a reference point. I'm gonna install this just a little bit past it. So I wanna make sure that these line up with the two openings. Then what I'm gonna do is install the hardware the same as for the front. Repeat that with the second hardware. Again, we're using a washer and lock washer. Now with our 17-millimeter socket, we can tighten these down and start to fold the cover. Make sure your clamp is free. Now, you can adjust this forward and backwards to make sure you have a good clamp on this bracket we just installed. What you're gonna do to install this is fold it up, grab the ledge of that bracket and clamp it down. Now if it's wiggling at all, it's not a good clamp on there, you can loosen it back up, tighten it by spinning it in. Hold it back down, grab the edge, and clamp it down. All right, now that this side is fully installed, make sure you repeat that process to install your passenger side. Once the tonneau is fully secure, you can shut your tailgate. And that is gonna do it for the review and install of this tonneau cover. And remember for all things Tacoma, keep it at extremeterrain.com.

      Product Information

      Features, Description, Reviews, Q&A, Specs & Installation

      Features & Specs

      • To Learn How to Measure Your Bed Click Here
      • Tonneau Cover with Soft Tri-Fold Design
      • With Locking Clamps and Pins
      • Soft Leather-Grained Vinyl Fabric
      • Aircraft-Grade 6061 Aluminum Frame
      • Added Security With Tailgate Lock
      • No-Drill Installation
      • Fits 2016-2023 Toyota Tacoma Models

      Description

      Keep Cargo Safe. Keep your cargo safe and away from prying eyes with the use of this Soft Tri-Fold Tonneau Cover made for the Toyota Tacoma. This cover has a soft yet durable leather-grained vinyl cover that protects items you place in your truck’s bed. This cover features a UV-resistant black vinyl cover with a tailgate lock that you can use to keep your items secure. It also has a sleek design that can improve fuel mileage.

      Tri-Fold Construction. With a trifold design, you can easily access the items in your truck’s bed with ease. All you have to do is fold up 1 or 2 panels to get what you need, depending on the size of the item. This tri-fold design also allows you to travel with the cover partially open when needed. A tailgate lock provides you with added security and safety straps that help keep your tonneau from flapping when used partially open.

      Durable and Sleek Construction. This tonneau cover is built to last, with a highly-durable frame made with 6061 aircraft-grade aluminum, which is both strong and lightweight. The vinyl fabric used in this product may be soft but this doesn’t mean it lacks toughness. It is weather-resistant, fade-resistant, and has a leather-like texture. All of these features combined give you a tonneau cover that looks good and is tough at the same time.

      Easy to Install. This tonneau cover is also a breeze to install. Since it gets to you completely assembled, all you have to do is to attach the cover using the installation hardware that comes with the package and you’re done. You can get your cover installed in as little as one hour with the use of basic tools. No drilling is required.

      Application. This Soft Tri-Fold Tonneau Cover is made to fit 2016-2023 Toyota Tacoma models.

      Technical Note. Not sure of your bed size? Click here for an instructional video explaining how to measure your bed length.

      Fitment:

      Details

      CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

      Installation & What's in the Box

      Installation Info

      What's in the Box

      • (1) Tonneau Cover Assembly
      • Installation Hardware
      4.0

      Customer Reviews (4)

        Reviews of similar Exterior products have an average rating of 4.5 out of 5

          Questions & Answers

          10 More Questions

          Will It Fit My Tacoma

          • 2.7L I4 - 16, 17, 18, 19, 20, 21, 22, 23
          • 3.5L V6 - 16, 17, 18, 19, 20, 21, 22, 23