How to Install Smittybilt Water Resistant Cab Cover w/ Door Flaps (07-17 Wrangler JK 4 Door) on your Jeep Wrangler

1. Unroll the cover.
​

2. Lay the cab cover upside down making sure that it is oriented correctly.
​

3. Lay the cab cover over the Jeep and align the corners of the cab cover to the corners of the windshield.
​

4. Slip the plastic piece of the cab cover underneath the body of the Jeep near the rear.
​

5. Slip the next plastic piece under the body.
​

6. Slip the final two plastic pieces under the body near the tail light.
​

7. Repeat steps 4-6 for the opposite side.

8. Take the straps near the tailgate and place the hook underneath the tailgate and secure it by pulling the strap.
​

9. Repeat step 8 for opposite side.

10. Take the three side straps and secure them underneath the body of the Jeep.

11. Repeat step 10 for the opposite side.
​

12. Finished.
​

Installation Instructions Written by ExtremeTerrain Customer Thomas Sandoval 06/07/2017
​