Free Shipping on Orders Over $75. Details

Talk to Wrangler Enthusiasts
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $10,000 in Store Credit! Enter Now >

How to Install the Rugged Ridge Matte Black Window Visors on your 2007-2014 Wrangler JK 2 Door

Installation Time

1 hours

Extreme Terrain
Shop Parts in this Guide

Note: Application and product my vary from illustrations. Caution: Before driving, ensure that all deflectors are secured properly.

Please read all instructions before installation of Wind/Rain Deflectors

Preparations Before Installation

∙ Check and determine if Wind/Rain Deflectors are the correct fit for your vehicle.
∙ Wash and Clean all mounting surfaces of the vehicle using Isopropyl Alcohol (Rubbing Alcohol).
∙ To ensure proper bond apply only when temperatures of mounting surfaces is between 65-110°F.
∙ Be sure all mounting surfaces are dry before installation​

1. Clean the painted surface where the deflector will be  attached using Isopropyl Alcohol (Rubbing Alcohol). 

2. Hold and position deflector to determine mounting position.

3. Remove 2” of tape liner from each end of the deflector.

4. Place the deflector in a desired location on the door.

5. Once the deflector is positioned, carefully pull and remove the tape liner. Apply firm pressure along mounting surfaces to secure. 

6. Apply same methods to the rear deflectors (if applicable).