Free Shipping on Orders Over $75. Details

Talk to Wrangler Enthusiasts
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Wrangler! Enter daily!
Win N-Fab Side Steps! Enter Daily!

How to Install Rugged Ridge Tubular Front Bumper w/Hoop, Titanium on your 1997-2006 Wrangler

Tools Required
  • Basic Hand Tools Required
Extreme Terrain
Shop Parts in this Guide

Important Notice: To obtain the correct installation, We recommend that you follow these instructions carefully. Please review the instructions before proceeding to install front bumper. Please take care when installing this product to protect the finish and your investment.

Installation Instructions

Step (1) Remove the front bumper from the vehicle. DO NOT DISCARD
ORIGINAL HARDWARE. It will be reused for the new bumper
installation.


Step (2) Position the new front bumper up to the frame and line up holes to factory mounting locations. Using the stock bolts and supplied
flat washers secure bumper to vehicle. Be sure to use all hardware
supplied and tighten all bolts.