FREE 1 to 3-Day Delivery on Orders $119+ Details

Talk to a Wrangler Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
$12k Summer Sweepstakes! Enter Daily>

How to Install Rugged Ridge Bumper Applique, Rear, Silver on your 2007-2013 Wrangler

Tools Required
  • Basic Hand Tools Required
View PDF Guide
Extreme Terrain
Shop Parts in this Guide

PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE YOU BEGIN.


Step 1. Remove the rear bumper. Remove the (6) bolts from the back of the bumper as shown. There are (2) bolts holding each side of the bumper to the frame and (2) in the center of the bumper. Do not discard the bolts, they will be used to re-attach the bumper.


Step 2. Place the cover over the center section of the bumper. Using light pressure hold the cover flush against the bumper. Use the supplied self-tapping screws to attach the cover. Install (6) screws top and (4) screws bottom in the pre-drilled holes in the cover. Re-install the bumper onto the vehicle.

Community Support

Word On The Trail

The videos outlining the capabilities, specs, and installation were instrumental to my decision on purchasing this winch. The website is well laid out which makes navigation a breeze. Friendly Customer Chat Support is helpful and appreciated as it provides a human connection for an otherwise cold internet transaction.

Honeylieg
Previous Slide Next Slide