Talk to a Wrangler Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
$20K Sweeps! 10 Chances to Win! Enter Daily >

How to Install Rough Country Steering Stabilizer w/ Relocation Bracket on your Wrangler

Installation Time

30 hours

Tools Required
  • ½ Socket/Wrench
  • ¾ Socket/Wrench
  • Hydraulic Jack
Extreme Terrain
Shop Parts in this Guide

Installation Instructions:


1. Remove the factory/aftermarket steering stabilizer


2. Install Rough Country Relocation Bracket by removing current stabilizer bracket bolt.


3. Install Rough Country Steering Stabilizer on axle mount and newly installed relocation bracket and tighten completely. Next, using Hydraulic Jack, lift front end of Jeep and turn driver side wheel inward.


4. Loosen track bar mount and rotate 90 degrees.


5. Complete install by installing opposite end of the Rough Country Steering Stabilizer and tighten completely.



Installation Instructions Written by ExtremeTerrain Customer JeepModReview 03/21/2017