(approx) 20 Minutes
Simple installation for anyone.
$34.99 (kit)FREE Shipping on orders over $75
Features, Description, Reviews, Q&A, Specs & Installation
Simplifies Installation. Make wiring up a Raxiom LED Light Bar in your Jeep Wrangler simple with a Raxiom Switch Kit. This Raxiom switch kit includes a switch, relay, and the required wiring to install a Raxiom LED light bar.
Modern Electronics. The Raxiom LED Lighting Switch Kit is assembled from state of the art electronic components, featuring a 30a inline fuse and a 40a relay to provide safe reliable continuous operation.
Application. This Raxion Switch Wiring Harness is specifically designed to install a Raxiom Off Road LED Light Bar on a 1987-2020 Jeep Wrangler, including YJ, TJ, JK and JL models.
Fitment: 1987 1988 1989 1990 1991 1992 1993 1994 1995 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
December 23, 2019
Raxiom LED Lighting Switch
Easy install! Only negative is the adhesive is not great at all.Helpful (4)
September 29, 2019
Good Wiring Harness
The wiring harness worked well, I wired up 2 Raxiom 4.5in LED lights to the switch. It works very well, but on the switch it has a sticky pad on the back. It fell off where I stuck it, but I was thinking about using Velcro to keep it secure. For the money it worked well for me.Helpful (3)
May 22, 2019
LED light switch
I love the light switch itself because it is easy to press on and off ..my mechanic had no problems with the installation and would highly recommend this productHelpful (3)
February 16, 2019
awesome switch , works with any lights , and easy to installHelpful (6)
January 31, 2019
Wiring harness for light bar switch is very good. Plenty of length and plug ends are very nice.Helpful (5)
December 31, 2018
The wire harness is well made and although it fairly simple to build your own wiring harness. This one is ready to install. I modified it so,e by using my own rocker switch and shorting it for my needs but it’s a low cost start to getting your lights or something up and going.Helpful (6)
December 24, 2018
Very convenient item for installation. Would recommend.Helpful (6)
December 22, 2018
Wiring harness for auxiliary lights
Previously When I added lights I used a different brand of harness. This time I used this one from Raxiom because I added their lights. Although this one had the wires in a plastic outer shield, it also had a connector from the switch which I had to cut off so I could feed the wire through the opening that leads to the engine compartment. It also does not have a separate power wire to allow you to wire it to a power connection that turns off with the ignition key.Helpful (6)
December 21, 2018
Great for people who cant wire
It was really easy to install, just make sure you have cable ties and electrical tape to secure and weather proof any of the exposed parts.Helpful (6)
December 19, 2018
Raxiom led light switch
Paired the raxiom light switch with my 50" raxiom light bar and made the install a breeze! Very easy to install was able to install my light bar and brackets in 15 minutes.Helpful (6)
Does the small led on the switch only illuminate when in the ON position? If it is lit when in the off position, does it go off then the vehicle is turned off? THX!
Hello, on this Switch Kit, once connected to the battery the Small LED will be on all the time.
Will the red LED on the switch drain the battery while the lights are off? The harness is made to connect to the battery, and with the red led always on, i want to know if this has been a problem.
The light on the Raxiom LED Lighting Switch Kit is low current, and will not cause any issues with battery drain.
Will this product work well with Rugged Ridge 3 in. Square LED Lights?
The Raxiom LED Lighting Switch Kit is designed around powering a light bar, so it will only have one set of leads to power up a light. in order to power up a set of cubes, a second set of leads would need to be added.
Can a different, panel-mounted, switch be used rather than the stick-on s/w provided? Looking for a neater install...
The switch in this kit can be replaced with any two position switch.
how many lights can you attach to this and if you can do more than one do you need to buy more connectors
This is designed to work with an LED light bar. You can use up to a 30 amp load on this setup and would have to be modified to wire multiple lights.
This is not replacing wiring, this is adding wiring. Being as your Jeep previously didn't have wiring for a light bar, now that you have a new light bar, you need new wires. This will fit any Jeep, at least that we support, yes.
The Raxiom LED Lighting Switch Kit utilizes a power and ground wire which can be used with an aftermarket horn. However, there are a handful of extensions on this wiring harness which you will not be utilizing with that type of application so you will need to relocate the extra wires.
This item is not designed to work with the SPOD setup. It is designed for stand-alone control of lights.
This wiring harness can support up to a 30 amp draw. On a 12.6 volt system, this would support up to about a 380 watt light.
The Raxiom 50 in. LED Light Bar has a spot/flood beam pattern, with the inner LEDs being designed for a spot pattern, and outer LED's set up for a flood pattern. This is fixed and not able to be changed nor can you only have one set of lights on, both will be on at the same time. TheRaxiom LED Lighting Switch Kit will be compatible with the Raxiom LED light bar.
The Raxiom LED Lighting Switch Kit will only have an all on or all off button, it will not feature a third option.
The Raxiom LED Lighting Switch Kit can be used with a dash mounted rocker switch. Any two position rocker can be used.
This Raxion Switch Wiring Harness is specifically designed to install a Raxiom Off Road LED Light Bar
Yes the Raxiom LED Lighting Switch Kit (87-17 Wrangler YJ, TJ & JK) kit can be used with a 4.5 LED light.
The maximum load capacity of the Raxiom LED Lighting Switch Kit is up to 300W.
(approx) 20 Minutes
Simple installation for anyone.
What's in the Box