(approx) 30 Minutes
Simple installation for anyone.
$69.99 (kit)FREE Shipping on orders over $75
Hey, guys. So, today, we're checking out the Raxiom 50-Inch LED Light Bar Mounting Brackets, fitting all 1997 to 2006 TJ Wranglers. So, if you're looking to mount up a 50-inch light bar to your Wrangler for some extra lighting on those dark back roads or dark trails, or even just a bump in styling, you're probably in search of mounting brackets as well. And this option by Raxiom is going to be a good and very affordable solution to that.Now, this set is gonna come up with two brackets in the kit, and they are going to accommodate for any 50-inch straight LED light bar while also putting that light bar at a high vantage point for a lot of that extra visibility. And they are gonna be strong and durable, made of a steel plating construction. And they're gonna have a nice textured black powder coat finish on top to ensure that these are not going to rust, they're gonna last a very long time, and they're gonna look good at while doing it.And I do really like the fact that this kit does come with a longer hardware to accommodate for that little bit of extra space that we're putting in between the A-pillar. And it's gonna come with foam to make sure that there's no metal-to-metal contact, keeping the paint on your TJ scratch-free. Now, these are going to not only just be all of that, but they also are going to be very slim and sleek in comparison to some other choices, perfect for somebody who's looking for that bump in styling with that extra lighting performance that they're gonna give with that 50-inch light bar.Like I mentioned before, these are going to be pretty affordable for light mounting brackets at roughly $70. And that's just mainly because these are a more simplistic style in comparison to some other choices for light bar mounting brackets that you may see on the page. So, other choices that usually mount up to the windshield are usually going to be brackets that mount up to a specific roof rack, or they're gonna take that classic tubular style with those pod mounting holes and, kind of, go from one part of the windshield over to the other. Now, again, these are going to be slim, low-profile, sleek, and they're gonna do the job when it comes to mounting up that 50-inch light bar.Now, as far as install goes, this is gonna be a very easy one out of three wrenches on the difficulty meter, and not gonna take you any time at all with some very basic hand tools. So, speaking of that install, let's jump into that now.The tools that I used for my install were an impact wrench, T40 Torx socket, and a 3/16-inch Allen socket.So, our first step is to remove the four bolts on our upper A-pillar here. This is where we're gonna mount up our bracket. So, these three bolts are going to be an Allen head on our Jeep, and then we have a Torx bolt down at the bottom. So, I'm gonna use a 3/16-inch Allen socket and my impact wrench. Go ahead and remove those.Now, for this bottom one, I'm gonna use a T40 Torx socket. Your hardware may be a little bit different on your TJ. All right. But once that's removed, we can grab our bracket and our cover here, and we can go ahead and install that. What we can do first before we can actually mount up our bracket is just install this foam piece. It's gonna lay inside here and cushioned to where we are mounting this up, just so there is gonna be no damage to our paint with metal on metal. So, this has a little bit of a backing. I'm just gonna pull this off.All right. Once that is off, we can line this up. There is going to be holes punched in the material, so we're gonna line those up with our mounting location. All right. Give it a good press. It's pretty flexible. Then, now, we can take our provided hardware and go ahead and mount this up. So, we are provided with longer bolts to mount this up. So, what I'm gonna do is just line up our bracket with our mounting holes and thread in our button head hardware. We are also going to have some plastic washers. Just make sure that those are hand threading correctly. And then, what we can do is grab our 3/16-inch Allen socket and tighten those up. After this side is done, what we can do is just repeat that process on the other side. So, after everything is tightened up, then you're all set to go.So, that's gonna wrap it up for my review and install. Make sure you like and subscribe. And for more videos and products like this, always keep it right here at extremeterrain.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
December 20, 2019
Awesome light bar mounts.
Great set of light bar mounts for the price. Excellent quality and fit. Very nice textured powder coating. Glad I bought them. Thanks.Helpful (2)
July 17, 2018
Good not Great
Product is what you would expect. The channel for the wiring is super tight. The powder coat is really thin and chips off easily, I would recommend painting before installing. But for the money, you can't beat it.Helpful (11)
June 27, 2018
The fit was great for my fathers TJ obvious rusty bolts but that comes with any northeastern jeep install! The extra space behind the mount itself was helpful with tucking wires for the light bar!Helpful (12)
June 03, 2018
these are some mint mounts
I have had no problems with these bad boys. I had some trouble getting the factory bolts out so I used my welder after stripping the bolts because I like to party. The bolts that came with mine were to long so I sent it on the chop saw and kissed em with the rotary file for a real minty fitment.Helpful (12)
March 06, 2018
Great buy.. Looks great.. Easy install.. Gives your jeep a beefy lookHelpful (12)
March 01, 2018
Good mounts, minor issues
I have a 2006 TJ and these aligned properly, but the existing bolts didn't work with the brackets. Also, I don't know if it's the mount or the LED light bar attached, but now me Jeep whistles obnoxiously loud at high speeds.Helpful (15)
February 24, 2018
Light bar brackets
Good buy.. Good fit... Good quality... Looks great...Helpful (12)
January 29, 2018
Easy install, I would recommend to mock everything up and run your light bar wires first by placing some tape above and below the bracket. Then mount the bracket over the wiring. I jumped the gun and mounted the brackets, light bar and then had to remove the drivers side bracket enough to run the wiring. Easy little project I did with my 9 year old son.Helpful (12)
January 03, 2018
Great mounts very sturdy and matched well with my already black Jeep. The only problem I had was the bolts that came with these were a 1/4 inch to long so had to get shorter ones but overall great product!Helpful (13)
August 27, 2017
Need better hardware
The mounts are solid construction and a good looking addition to my TJ. Mounting holes lined up and bolted on with no problems. But... the mounting hardware had surface rust the next morning. I had to replace them with stainless steel.Helpful (13)
Can you fit a curved light bar
These mounts are for use with part numbers J106721, J106723
how thick of steel are these manufactured from?
Will this fit a curved 50 in. Light bar?
Do you need a to buy a switch to install? If so which one works best?
This item is just a light bar mount. No light bar is included. The suggested light bar and switch recommended for installation can be found at the links below. Light bar - https://www.extremeterrain.com/raxiom-50in-straight-dualrow-led-lightbar-flood-spot-8717-jeep.htmlSwitch - https://www.extremeterrain.com/raxiom-led-switch-kit-j100996.html
Will the Raxiom 50 in. Straight Dual Row LED Light Bar - Flood/Spot Combo (J106721) fit this bracket? The description for the bracket says it will fit J106721, but looking at the light bar’s description it lists 3 brackets that it will work with. None of which are this bracket.
This bracket will accommodate the Raxiom 50 in. Straight Dual Row LED Light Bar - Flood/Spot Combo (Item #J106721).
The Raxiom 50 in. LED Light Bar Windshield Mount will work with the Raxiom 50 in. Slim LED Light Bar yes.
No, the Raxiom 50 in. LED Light Bar Windshield Mount is not intended for use with YJ models and we are unsure of what modification would be needed to work with your YJ.
(approx) 30 Minutes
Simple installation for anyone.
What's in the Box