Get Reliable Temperature Readings on Your EVO or JDM Series Gauge.
When it comes to keeping tabs on fluid temperatures in your Jeep, you need a quality temperature sender that you can rely on. If you’ve installed an EVO Series or JDM Series Temperature Gauge from Prosport, this EVO/JDM Temperature Sender is the ideal way to make sure your readings are accurate and reliable. It works for water/coolant, engine oil, and transmission fluid temperatures.For EVO and JDM Series Gauges.
Temperature senders feature a resistor that alters resistance depending on the temperature. To get accurate temperature readings on the gauge, you need the right resistance range. This EVO/JDM Temperature Sender reads 5830O at 104F, 1268O at 194F, and 316O at 302F, so it is perfect for EVO and JDM Series but not other series.Simple Screw-In Installation.
The Prosport EVO/JDM Temperature Sender is a standard fit. It screws into a 1/8” NPT threaded fitting.Application.
The EVO/JDM Temperature Sender is perfect for use with Prosport EVO and JDM Series temperature gauges in any 1997–2020 TJ, JK or JL Jeep Wrangler.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov