(approx) 1 Hour
Simple installation for anyone.
$349.20 (pair)FREE Shipping Market Price $401.99 You Save 13% ($52.79)
Add Local Shop Installation
Saved - View your saved items
We're sorry. We couldn't save this product at this time.
Merideth: If you wanna switch up your tail lights for something a little bit cooler, these Oracle Flush Mount LED Tail Lights with the black housing and the clear lens will be a good option to choose for your 2007 to 2018 JK Wrangler. Now, these will be right up your alley if you're looking for a unique tail light option that will add not only some modernized and various slick styling, but also increase your lighting performance at the same time. These will also be at super low profile. So, if you're frequently taking your JK off-road and you wanna minimize any trail damage, these will do just the trick.Now, these are gonna feature a flush design that will stay out of the way of branches obstacles on the trail. And it's really gonna add that custom look to the rear end. As you can see, these are going to be a very thin in comparison to an average tail light. Now, the outer portion of the tail light will feature a red C-shaped LED light bar as the perimeter lighting, and on the inside each of these walls so feature 12 high-powered LED lights. Again, offering better and brighter and cleaner visibility to the rear end. This will not only make you more noticeable while driving, but this is also going to offer an increase again in visibility especially when you're backing up with those bright white LED lights, ultimately, making you safer while you're driving.Now, this is gonna have a solid plastic housing with an OE textured finish, which is gonna do really well at matching any other OE textured trim. And it's going to have a durable clear lens on the front here and a red lens around the side that's going to do a really good job of protecting the lighting on the inside. Now, that lens will also be hard-coated and UV resistant, making it resistant to weathering and fading to keep it looking new for years to come. And the setup will also be completely plug and play. As you can see here, this is going to have a JK style plug. So that's gonna make this a hassle-free mod if you're not looking to do any wiring, when you're upgrading to a set of LED tail lights.These are gonna be a little bit more expensive than the average tail light, but for good reason coming in at roughly $375 making this more of a premium choice. Now, what I will say is that these are going to be incredibly unique in the design considering that they're gonna be flash mounted and they're very well built with high-quality components while also remaining plug and play making these a solid pick. Again, if you don't wanna do any wiring and you want something that you can just bolt on and go. Now, I think if you want your JK to stand out from the rest when it comes to lighting on your jeep and then this is going to be right up your alley.Now, install for these is going to be a 1/3 wrenches on the difficulty meter, taking you about an hour to get the job done with some basic hand tools, but I wouldn't be surprised if you got it done a little bit sooner. Now, at this point, we can head over to the shop and check out a detailed breakdown of the install process and what it looks like step by step and how to get these onto your JK at home. So, that's gonna wrap it up for me. Let's go ahead and get into it.Male Speaker 1: For this install, you will need a Phillips head screwdriver. What's up guys? Today we're gonna be installing some tail lights on our Wrangler, but before we go ahead and do that, let's send you to watch a short video on how to uninstall your factory tail lights and we'll see you when you get back.Male Speaker 2: Okay, to begin, this assembly, we're gonna go ahead and remove the two inner screws from our factory tail light. This one here and this one down here. Slightly slide your tail light towards the inside of the vehicle and lift off, pressing down this tab, unclip, and that's it for the removal of our factory tail lights.Male Speaker 1: Alrighty guys, welcome back. Now that we've shown you how to uninstall your factory lights, let's go ahead and put our new ones in. Now, the first step is going to be to clip your LED block here onto the pinch weld located inside of your tail light housing. And it comes with these two clips and the bracket already installed. So, you'll have to do is slip these clips onto the pinch weld.So, the first step is going to be to install our LED block onto the pinch weld located inside of your tail light housing. And to do that, we'll go ahead and slide these pre-installed clips on our bracket onto the weld and then go ahead and secure that in place. And then we can go ahead and make our connection with factory tail light connector and you should hear a confirmation click. Make sure it's installed, and then we can go ahead and tuck our harness in and set our new tail light in place. You do have this side bracket here located on the back of your tail light. You want to go ahead and slide that around the outer edge of your housing, then go ahead and push those back into place and line up your two screw holes. Then we'll reuse our factory hardware. Go ahead and get those threaded in. Get both of them hand tight just to line them up. And then we can go ahead and use our Phillips head screwdriver to tighten these down. Go ahead and tighten down our bottom screw. Now, once you've completed this, you can go ahead and repeat this process for your other side.Alighty, guys, that about wraps up our review and install of our Oracle Flush Mount LED Tail Lights with black housings and red clear lenses for your '07 to '18 Jeep Wrangler JK. Thanks for watching. And as always, for everything Wrangler, keep it right here at ExtremeTerrain.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
|Tail Lights Style||Custom Style|
|Tail Lights Type||LED|
|Tail Light Lens Color||Red|
Low-Profile Design. The Oracle Flush Mount LED Tail Lights are here to give your 2007-2018 Jeep Wrangler JK an aggressive makeover. Made with black housing and a red clear lens, the look of these lights is one of modern aggression and style. The signature perimeter lighting showcases a low-profile design for perfect flush mounting, giving you a truly streamlined look.
Seamless Integration. Featuring high-powered LED reverse lights and an easy plug-and-play installation process, this product has been designed with convenience in mind. Plus, it integrates seamlessly into your current model so you won’t have to take apart your Jeep pieces when installing.
Installation. Putting these Flush Mount LED Tail Lights on your ride is easy and requires no drilling.
Warranty. There is a 1-year limited warranty on this product.
Application. These Oracle Flush Mount LED Tail Lights work with all 2007-2018 Jeep Wrangler JKs.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
(approx) 1 Hour
Simple installation for anyone.
What's in the Box
10 More Questions