Motobilt Full Length Rocker Guards with Step; Bare Steel (04-06 Jeep Wrangler TJ Unlimited)Find parts that fit my vehicle

The Motobilt Jeep LJ full length rocker guards with step extend from the front fender all the way to the rear wheel well opening are in-house laser cut CNC formed from 3/16 inch thick high strength steel plate. Our rocker guards are formed so that they wrap under neath the body of your jeep and tie into the factory body mounts. We also slot the lower portion of the rocker guards to make it easy to clean out your rockers after a hard day of wheeling. Motobilt Jeep LJ Rocker Guards are countersunk and ship bare metal with hardware included.

• Jeep LJ full length rocker guards
• Works with or without body lift. 
• 1.75" DOM steel tube step with grimple step plate
• 3/16 inch thick high strength steel
• Hardware included. Nut serts are only used where a bolt is not accessible from the back side.
• 12- 5/16 inch counter sunk bolts with flat washers and nyloc nuts
• Sold as pair
• Weight: 80lbs (approx.)

Compatible Motobilt Corner Guards.

• MB1063 Factory wheel opening corner guards
• MB1065 - Blank Corner Guards

Technical Notes.

• This setup allows for use with the Motobilt Jeep TJ factory cut corners PN MB1063
• Will work with stock or stretched wheelbase.
• Drill Bit Size: 5/16” nut serts use a 17/32” drill bit to install.
• Ships raw steel. Must be painted or powder coated to prevent rust.
• Please test fit all of your Motobilt products before you paint them
• If running the Motobilt front fenders, then choose the drop down menu option for our fenders.  They are shorter and have a notch cut out to clear the Motobilt fenders.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov