Motive Gear Dana 35 Rear Axle Ring and Pinion Gear Kit; 3.55 Gear Ratio (87-06 Jeep Wrangler YJ & TJ)

Better Performance. Are you an offroad enthusiast and have been suffering problems with your Jeep’s transmission which prevents you from exploring rough terrains? If so, then install the Motive Dana 35 Rear Ring Gear and Pinion Kit - 3.55 Gear to overcome this. These gears have a moderately steep ratio of 3.55 that is well suited to allow you cruise both street and offroad terrains. It’s a perfect OE replacement or upgrades for your factory rear ring gear and pinion.

Re-Gearing Benefits. For you to realize full potential capabilities of your Jeep after fitting it with larger tires, you have to re-gear so that you can achieve fuel efficiency and not compromise the acceleration levels of your vehicle. Additionally, the gear is quiet thanks to the perfect manufacturing that makes it attach well to the shim.

Sturdy Construction. To give the 3.55 ratio Dana 35 rear ring gear and pinion kit ultimate durability, Motive gears forged it using an elaborate computerized heat controlled system that makes the gear solid so that it can remain sturdy to offer you long-term service.

Expert Installation. Installation of the 3.55 gears ring and pinion kit can be a complex procedure that will require the intervention of a qualified mechanic.

Warranty. Dana 35 rear ring gear and pinion kit come with a 12-month/50000-mile warranty on the manufacturing defects.

Application. The 3.55 Motive Dana 35 Rear Ring Gear and Pinion Kit is built to fit on all 1987-2006 Jeep Wrangler YJ and TJ Models.

Application Note. These Dana 3.55 gears require the use of a 3.73 or higher differential carrier.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov