(approx) 2 Hours
Simple installation for anyone.
$470.99 (pair)FREE Shipping
Hey, guys. So today I'm here with the Mopar Side Steps, fitting all 2018 and newer four-door JL Wranglers. So if your Wrangler didn't come with a side step right out of the factory and you're looking to fill that wheel to wheel space with something to get you an extra boost up into your Jeep or you already have the factory side steps and you caused a little bit of damage off-road, this option by Mopar is going to be a perfect solution.So this is going to be for the Sahara model owner looking to have a replacement to a damaged factory side step or to a lower trim or a sport model owner who's looking to add a factory style side step in that wheel to wheel space. Now, this is gonna provide you a large five and a half inch step to help you get a boost up into your Wrangler, some easier cab access or to help with some extra roof access. And this is also gonna have a honeycomb design on the face of the running board giving you a little bit of extra traction on those wetter days.Now, these are gonna serve as some lighter protection. They are made of an impact-resistant plastic. However, these are not going to provide some heavy duty protection and survive any hard hits out on the trail. So if you were looking for some heavier duty protection, we do offer that. So I would take a look into some steel options. However, if you're just looking for a boost up into your Jeep or you're just looking for that lighter protection or something to fill up that wheel to wheel space right out of the factory, this is gonna be a good choice.Now, these are gonna be a little bit more expensive since it is a Mopar part, it is a factory part so you are gonna be paying a little bit of a premium at roughly $475. Now, in comparison to some other lower price options, this is gonna fit very well considering it is a factory part. It sits very high up close to your rocker and it really flows with all of those body lines. Now other less expensive choices are usually gonna be for some more basic options. They are gonna have some basic styling. They are going to most likely be a tube design but with this, you are getting that really nice look and that finished factory look, so this is going to be a great choice for owners looking for that.So install is gonna be a one out of three wrenches on the difficulty meter, taking you roughly two hours to install with some very basic hand tools. So speaking of the install, let's jump into that now.Tools that I used for my install were an impact wrench, a 13-millimeter, and a 10-millimeter deep socket, and a quarter-inch drive ratchet. So to kick off this install, we want to make sure that we have the correct side. They are gonna be side-specific and they are labeled on the box but how you can tell is the smaller end is gonna be facing the rear of the Jeep and the larger end is gonna be facing the front. Then we're gonna be able to mount up our sidestep. I would have your hardware staged as well as a 13-millimeter socket and a 10-millimeter socket to get started.So first we're going to mount this up. These do have studs so this will hang in place. So we're gonna line that up with the pinch weld and send our studs on through and then we can head underneath our Jeep and secure them down. So what we're gonna do is start with the body mount. You're gonna be provided with a 13-millimeter bolt and we're gonna thread this into the captured nut plate in the body of our Wrangler.Now, we don't want to tighten it down just yet. We want to get the rest of our hardware in and then we can go back and tighten everything down. So now we can move down to the pinch weld where our studs are poking through. I'm gonna use the provided nut and thread that on. Again, we don't want to tighten anything down until the end and on the other side of this bracket, there's gonna be another stud.So after all of that hardware is threaded on, we can repeat the same process for the other two body mounts. So after you have all of your hardware threaded on then we can go back and tighten everything down. Now for the suds, I'm going to be using a 10-millimeter deep socket and a quarter-inch drive ratchet. Then for our body mounted bolt, we can switch to a 13-millimeter deep socket. I'm also using an impact wrench as well. Then we can do the same for the other two brackets.That's gonna wrap it up for my review and install. Make sure you like and subscribe and for more videos like this, always keep it right here at extremeterrain.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Make Entering your Jeep Easy and Secure. Mopar Side Steps feature a wide footboard with a non-slip design for easy and secure entrance into your 2018-2020 Jeep Wrangler 4 door. These side steps are constructed to match the look and specifications of Wrangler factory-installed steps, but with Mopar quality. What this means is you get to also enjoy adequate protection in city driving. (Off-roading can potentially damage your steps.)
Sleek Black Impact-Resistant Plastic Construction. Mopar Side Steps are made from impact-resistant plastic. These steps also feature a flat black finish that contrasts nicely against any Wrangler body color.
Engineered for Efficient Installation. Mopar Side Steps do not need any special tools, or modifications for proper installation. Just standard hand tools will do.
One-Year Warranty Against Manufacturing Defects. Mopar Side Rails are backed by a 12-month warranty covering manufacturing defects. Please check out the manufacturer’s website for more details.
Application. Mopar Side Steps are compatible with all 2018-2020 Jeep Wrangler JL 4-Door models.
Fitment: 2018 2019 2020 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
(approx) 2 Hours
Simple installation for anyone.
What's in the Box
10 More Questions