Steering Pitman Arm Nut (76-18 Jeep CJ5, CJ7, Wrangler YJ, TJ & JK)

Helps with Steering Alignment. A loose nut in the pitman arm can cause steering issues such as excessive play on the steering wheel. Prevent these problems by replacing the nut with a brand-new Steering Pitman Arm Nut. If you’re lucky enough, the actual pitman arm may not need replacing. It’s more cost-effective to replace just the nut to get your Jeep’s steering back up to scratch.

OE-Equivalent Steel Nut Construction. This replacement pitman arm nut is made from a steel alloy that meets or even exceeds the factory standard. This ensures that you won’t be needing a replacement for years. In addition, the nut replacement follows the factory design for a precision fit, allowing a secure mounting of the pitman's arm to the steering box. Lastly, it comes in a raw, unpainted finish.

Pitman Arm Nut Installation. All it takes are simple tools to replace the nut on your Jeep’s steering pitman arm. Make sure you make a thorough inspection of your steering system to determine if your pitman is ok to reuse with your new nut.

Application. The Steering Pitman Arm Nut is compatible with all 1976-2018 Jeep CJ5, CJ7, Wrangler YJ, TJ, and JK models.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov