FREE 2 or 3-Day Delivery on Orders $119+ Details

Talk to a Wrangler Enthusiast
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
Win $3,000 in Store Credit! Enter Daily >

Sequential LED Tail Lights; Black Housing; Smoked Lens (18-23 Jeep Wrangler JL)

Item J133470-JL
Call a Wrangler Enthusiast at 1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Our Price

$364.99 (pair)

FREE Shipping Market Price $426.99 You Save 15% ($62.00)

Will this fit your Vehicle?

Select a different vehicle Help?
Update or Change Vehicle
Out of Stock

Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
Recommended Install Shops
How It Works

Add Local Shop Installation

Install Shops are available near Ashburn - 20149
Total cost of service $125.00
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    or use

      Video Review & Installation

      Hey guys. So, today we're checking out the Smoked Sequential LED Tail Lights fitting all 2018 and newer JL Wranglers. So, if you're looking for an update in lighting to the rear end of your Wrangler or just to replace your factory lighting if you've damaged one out on the trail or you're just sick of the halogen lighting, this option is going to be a great choice to take a look into. So, this is gonna be perfect for somebody who really wants to add a custom look to the back end of the Wrangler with the ring design and the sequential features, but is also looking for more blacked out look at with this very sleek smoked lens. Now, the LEDs are going to be a lot better than those factory halogens being a lot brighter, making you a lot more noticeable while you're out on the street especially with this custom look. And it's even gonna be great if you're looking for a set of tail lights that are brighter than your factory ones, especially if you're looking for extra visibility when you're backing up your Wrangler. Not to mention these also are gonna be a little bit more durable than the factory lights, and that's gonna help you guys that are going on on the trail and wanna make sure that these are able to hold their own to any branches or brush.With all that being said, these are gonna be roughly $300 putting them in a pretty average price point for LED tail lights. Now, some other options on the page may be set up a little bit differently. Some may have clear lenses and may have a red reflector or a chrome reflector instead of this option which will have obviously that smoked lens and a very blacked out look. So, again, if you are looking to upgrade your tail lights to something that's a lot brighter and is going to give you a sleeker and more custom look at the back end of your Wrangler then this is a great choice to take a look at.Install is going to be very easy at a one out of three wrenches on the difficulty meter. Everything you see here is going to be plug and play and you're going to need a couple of basic handles to get the job done. So, speaking of that install, let's jump into that now. The tools that I used for my install were a flathead screwdriver, a Philips head screwdriver, the JL ratchet and T40 Torx from the JL toolkit.So, our first Up to this install is actually to go inside our cargo area or our tailgate area. So, whatwe're gonna do is just open up our tailgate and pop our glass. So, now that we're inside our cargo area at the back here, we're gonna have a little trim piece. I'm just gonna pop that off with a flathead screwdriver, you can use a trim removal tool or really anything. There is a little tab here, all you got to do is pop it up, pull that out of place. Then what we can do is access that bulb that's holding on our tail light. Now it is going to be a T40 Torx, you can use a T40 Torx socket or since you do have a T40 Torx supplied in your JL toolkit, you can just use that with the ratchet and that's what I'm gonna do. So, this is a little bit difficult to see. It will be easy to see once you are inside of your JL and taking this out. But there's gonna be a little plastic bolt and what we're gonna do is just thread this out, it is also going to be spring loaded. So, it may not feel completely unthreaded. All right. Then we can just remove that and we'll be able to pull out our tail light.What we have to do now is just wiggle our tail light, should come out of place, you just have to pull straight back. As you can see, this is where it attaches in the inside of our tailgate there. So, we don't actually have ours clipped on but this will usually just be clipped onto your tail light like that, gonna pull this red tab back, then we'll be able to release that clip and pull back on the harness. So, it maybe a little bit difficult to release this at first, you can just take a flathead screwdriver or any flat edge, it's small enough.So, as you can tell side by side, this is our factory light and this is gonna have the mounting bracket on it that we just took off. Now, this is our new light, it is going to have posts to mount up the mounting bracket or swap it over. So, that's exactly what we're gonna do. I'm gonna take a Phillips head screwdriver because it's only held in by three Phillips head screws as well as a little retainer clip. So, I'm just going to take that Philips head and we can take these screws out and transfer this over to our new light. Once it's disconnected, making sure that the lights are oriented in the correct way, everything's lining up, just gonna put this to the side so it's not in the way, we'll line it up with those mounting locations. You're also going to have a couple holes as far as lining it up with the pins with the alignment pins there. We can take the screws from the factory, transfer them right into our new light and you're gonna need to use a little bit of pressure just because this is a screw going into plastic. We'll get all these in then we'll tighten them down. So, once our bracket is transferred over and installed, now we can mount up our light.So, now we can plug it in our light, this is gonna be plug and play, pretty basic, wanna hear it click, line this up and then we can reattach our bolt. So, now that the tail light is sitting in the back of our Jeep, what we can do is take our factory bolt, you can take that T40 Torx and the ratchet from the JL toolkit and tighten that up. Now, I would like to mention again that this is plastic, you don't wanna overtighten it and end up breaking the bolt into the tail light. It is gonna be spring loaded so we'll keep tension on there and make sure that it's not releasing or unthreading while it's sitting in the back here. So, once you get a little bit of tension, we can go ahead and pop our cover back on.Before we hop into the rest of the install, I did wanna stop down and tell you guys a little bit more about these new tail lights, what benefits that you're gonna get out of these in comparison to your factory setup. Now, right off the bat, you can tell that these are going to be set up completely different in comparison to your factory tail lights. On your factory tail lights you're gonna have that standard red and white reflector with a reflector on the side and it's overall just going to be a pretty basic setup. Now, when moving over to this new tail light setup, this is going to look a lot sleeker with that smoked housing, perfect for you guys out there that are looking for that blacked out look. Now, that lens is actually going to be a little bit more durable than your factory reflector or your factory lens made of a polycarbonate material, so it'll be able to hold its own while it is out on the trail. Now, the actual housing itself is going to be very similar, it's made of an ABS material so that is going to stay more or less stock when moving over to this new tail light setup.Now, the big step up in comparison to your factory is the fact that this is going to integrate LEDs. This is gonna have multiple LEDs inside of the housing that's going to be a lot brighter making you and your Jeep a lot more noticeable while you're out on the street. They're also going to just look a lot cleaner and they're going to be a lot more efficient. So, these are going to last a way longer time than your factory halogen bulb. Not to mention you are getting a very custom look. The LEDs inside are going to be set up in a circular position in comparison to the traditional styling of your factory housing. You're getting that smoked look for a sleeker look on your Jeep and it's also going to have that sequential tail light sequence. So, when you hit your turn signal it will pulse around the actual circle instead of just blinking like your standard light. Not to mention these are also going to be DOT and SAE approved and they are plug and play making for an easy install as you just saw. So, speaking of that, let's finish up our install.After your tailgate is closed up and everything's tightened down then you're all set to go. So, that's gonna wrap it up for my review and install. Make sure you like and subscribe and for more videos and products like this always keep it right here at

      Product Information

      Features, Description, Reviews, Q&A, Specs & Installation

      Features & Specs

      • Aggressively Elegant LED Tail Lights
      • Improved Safety and Enhanced Style
      • Premium LEDs
      • Stylish Smoked Polycarbonate Lenses
      • High-Strength, Black ABS Housings
      • Simple, Plug-and-Play Installation
      • Sold as a Pair, Driver and Passenger Sides Included
      • Designed for All 2018-2023 Jeep Wrangler JL Models


      Enhanced Visibility and Style. Equip your Jeep Wrangler JL with improved visibility and a striking rear-end style by means of the Black Smoked LED Tail Lights with Sequential Turn Signals. These tail lights offer enhanced safety with bright LEDs and directional indications. The distinctive light patterns also appealingly enhance your JL’s exterior, making your Jeep stand out.

      Tough and Black. These LED Tail Lights feature hermetic seals for all-weather protection. The housings are made of durable black ABS with smoked polycarbonate lenses for long-lasting functionality. This combination also enhances your JL’s visual appeal.

      Plug-and-Play Installation. Designed for a simple installation, this pair of Tail Lights requires light mechanical skills and some wiring experience. It features a hassle-free installation that reuses the factory mounting locations of your vehicle.

      Application. The Black Smoked LED Tail Lights with Sequential Turn Signals are specifically designed to be used on all 2018-2023 Jeep Wrangler JL models.


      CA Residents: WARNING: Cancer and Reproductive Harm -

      Installation & What's in the Box

      Installation Info

      What's in the Box

      • (1) Driver Side Tail Light
      • (1) Passenger Tail Light

      Customer Reviews (38)

        Questions & Answers

        10 More Questions