Designed for Installations That Do Not Include a Bearing Change
For Reverse-Cut Dana 30, 26-Spline Setups
Includes Pinion Nut, Pinion Seal, 10 Ring Gear Bolts, Pinion Shims, Pinion Preload Shims, Carrier Shims, Gear Marking Compound, Thread Locking Compound, and Silicone Sealer
Works with 1987 - 1995 Wrangler YJ with the Reverse-Cut Dana 30
Specs. G2's Dana 30 minor install kit gives you everything you need to install a new aftermarket ring and pinion set on a Jeep Wrangler fitted with a reverse-cut 26 pinion spline Dana 30 axle. The task of fitment of the new ring and pinion will be made much easier with this kit, which puts all necessary shims, bolts, nuts, and compounds at your fingertips. You'll be applying the silicone sealer and congratulating yourself on a job well done before you know it.
Construction. G2's minor install kit for classic YJ Wranglers comes with a full assortment of necessary elements. A pinion seal and pinion nut, 10 ring gear bolts, a shim kit with three kinds of shims (pinion preload shims, pinion shims, and carrier shims), a tube of gear marking compound, a tube of thread locking compound, and a tube of silicone sealer. All parts and compounds are made to premium quality standards to assure a successful installation.
Application. Works with 1987 - 1995 Wrangler YJs with the Dana 30 axle.
Ryan E, 2002 Jeep Wrangler TJMarketing Coordinator I have been into Wranglers since I was young. My dad has owned quite a few over the years and if I wasn’t in a lifted wrangler I was in something lifted. When I was old enough to drive I bought a Cherokee and went through 3 of them before deciding I wanted a Wrangler. So I sold my Cherokee and sat o...