Win Two 2018 JL Wranglers! Enter Now
Talk to Wrangler Enthusiasts
1-844-887-6502
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Free Shipping on Orders Over $75. Details

Axial Flexible LED Strip 36 in. - Red (87-14 Wrangler YJ, TJ, JK)

Market Price $24.95 You Save 15% ($3.74)
Our Price

$21.21 (each)

FREE Shipping on orders over $75
  • Item J102448
  • MPN# J102448

In Stock Ships same business day. Choose options to add to cart

Features, Video & Details

  • Flexible 36 Inch LED Strip
  • Super Bright Red LED Lights
  • Easy to Install
  • Pre-Defined Cutting Points
  • Universal Fitment
  • Sold Individually
  • For 1987-2015 Jeep Wranglers

Review & Installation Video

Review & Install Video

I'm Ryan from extremeterrain.com, and this is my review and installation of LED strips, fitting all 1987 and up Wranglers. Today we are going to talk through the installation of these LED strips, but also a few of the features and the construction. These strips are available in either 15 or 36-inch sizes, and they're also available in a variety of different colors. You can get these in white, red, blue, green, amber, or a color-change version, which is going to be more expensive because it does have a controller to adjust the colors. These can be put anywhere from interior to exterior to under the hood, anywhere you wanna add some light for either functional work light or for an accent light. These will also make a pretty good rock light if you're somebody who goes off road at night and wants their spotter to be able to see underneath their vehicle to avoid getting hung up. Regardless of what color and what size strip you decide to go with, these are a flexible light, so again, they are very versatile as far as where you put them. They're also a very, very bright light, so you are going to get a ton of light output from these little strips. Something else that makes these very versatile is the fact that they have pre-determined cutting points. So if you have the 36-inch strip, you can certainly cut them at the pre-determined point, solder an additional set of leads onto it, and now you have two shorter lights. Speaking of the leads, that is how you will attach these to the vehicle and get them wired up. They do have a two-wire lead that is pre-soldered on there, so if you don't want to cut the light, you can certainly just attach that to any 12 volt source on your vehicle and you're good to go. However, if you do wanna cut, you will have to do a little bit of soldering to add a second set of leads onto that second light that you've created. As far as actually attaching these onto the vehicle, these come with 3M adhesive on the back of them that will make it very easy to attach anywhere you wanna put them. Again, these are going to be weatherproof, so you can put them outside, under the hood, or inside your vehicle. Getting these lights attached to your Jeep is, as I mentioned, a very, very simple process. However, there is going to be wiring involved no matter how you decide to get these hooked up. So, I am going to give these a two out of three wrenches. If you're somebody who's very comfortable with automotive wiring, this won't be a big deal and should be a very easy install for you. However, if you haven't done a lot of automotive wiring in the past, this might take a little bit more research and a little bit more time to complete, or you may wanna take this to a shop and have them help you out. Getting the light attached in its position, as I mentioned before, is done with the pre-applied 3M adhesive, so all you need to do is clean the surface you wanna attach the light to and give it a good press. After that, you will wanna route your wiring and make all of your wiring connections. I will say that this install will probably take you around an hour, that's if you are doing the wiring yourself. Of course, if all you're doing is sticking the lights on, that can be done in less than five minutes. As with any time you're using 3M adhesive for installation, you wanna make sure that the surface you're attaching the light to is very, very clean. You can wipe it down with an alcohol prep pad or any other alcohol-based cleaner, and that will ensure that this is going to stick and stay where you put it for a good long time. Another tip for using this 3M adhesive is that it likes to be applied when it's warm. You wanna be sticking it onto your Jeep when it's about 70 degrees. So, whether that means in a heated garage in the wintertime or outside in the summer, you wanna make sure this is done when it's warm outside. If you do it when it's cold, the adhesive isn't going to set up, and you could end up with the lights falling off. There are a lot of different places to get LED strip lights like these ones. However, these ones are going to be a little higher quality because they're very bright, they'll last a long time, and they have real 3M adhesive on the back of them. Some of the cheaper versions are going to use a lesser quality diode, which is going to burn out or not produce quite as much light, or they could have a cheaper adhesive on the back, making the light fall off very easily. So those are the reasons that I think these are worth the a little bit of additional cost you have to pay for them over some of the other versions that are available in the market. So whether you're looking to add a work light underneath your hood, accent lights on your interior, or rock lights under your chassis, these flexible adhesive LED Strips are going to do the job. So, that's my review of the LED Strips, fitting all 1987 and up Wranglers, that you can find right here at extremeterrain.com.

Custom Lighting. Upgrade your rig with custom lighting with use of this Axial 36 in. Flexible Red LED Strip. Designed to be cut down to custom sizes with pre-determined cutting spots, this strip can be added to any surface for full additional LED lighting where you want and need it. Red is perfect to make your own custom braking light pattern or to accent your factory red trims. No matter where you decide to mount it, this strip will provide custom aggressive style to your Wrangler/

Easy To Use. This 36 inch Axial LED light strip is super flexible, allowing mounting on contoured surfaces for an exact fit. Designed to work in conjunction with your Wrangler's 12V system this strip is ready to wire up to a switch or your factory running lights with pre-installed 3M tape for a painless and fully custom upgrade.

Application. This Axial 36 in. Flexible Red LED Strip is designed for universal fitment on all 1987-2015 Jeep Wrangler YJ, TJ and JK models including Rubicon and Unlimited models. Additional wiring required for installation. Sold individually.

Fitment: 1987 1988 1989 1990 1991 1992 1993 1994 1995 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 Details

What's in the Box
  • (1) 36 inch LED strip
Installation Info
Will it fit my Wrangler?
  • YJ - 87, 88, 89, 90, 91, 92, 93, 94, 95
  • TJ - 97, 98, 99, 00, 01, 02, 03, 04, 05, 06
  • TJ Rubicon - 03, 04, 05, 06
  • TJ Unlimited - 04, 05, 06
  • JK - 07, 08, 09, 10, 11, 12, 13, 14
  • JK Rubicon - 07, 08, 09, 10, 11, 12, 13, 14
  • JK Unlimited - 07, 08, 09, 10, 11, 12, 13, 14

People Who Bought This Item Also Bought

Most Helpful Reviews

5/5
Bright Lights!!

These lights gave my jeep an awesome appearance!! Got it wired up with ease and puts of an excellent amount of light to make the jeep pop!

Helpful (2)

5/5
Cool rock light

This is a cool courtesy light, and rock light, but not bright enough so I will be adding white ones for extra rock lights.

Helpful (1)

Overall Rating 4.3 out of 5 stars
Read All 13 Reviews

Customer Photos

You Might Also Like

10 Questions / 6 Answers

Ask a Question

How would one get this to work with the light that come on when you open the door and independently? at the same time?

Unknown

  • In order to wire the Axial Flexible LED Strip 36 in. to work both with the door, and independent of the door, you would need to run two independent wires for this, one to your door switch wiring, and one to a separate switch, which both tie to the lighting harness. It is possible with a wiring setup like this for power to backfeed into the dome light circuit when the rocker switch is used, so we recommend a diode be installed in this line to prevent the dome light from coming on with the independent switch.

    Rob D

Helpful (0)

Will this work on a 2017?

GeronW

  • The Axial Flexible LED Strip 36 in will work with the 17 Wrangler, but wiring may be slightly different from earlier models.

    Rob D

Helpful (0)

Can you wire 8 of the strips to a single spod switch? I'm guessing yes, but I want to make sure before I purchase these. Thanks

JoeU

  • You can wire 8 of the Axial Flexible LED Strip 36 in to a single switch, however It would be recommended to have the switch controlling a relay that activates the lights. It would also be advisable idea to wire these in parallel branches, as opposed to wiring these in a series.

    Rob D

Helpful (0)

Hi! Can I wire 2 of these together? I have an unlimited and I'd like to put more than 36" under each side. Thanks!

AndrewK

  • You can run two of the Axial Flexible LED Strip 36 in. together, however you would need to wire them separately.

    Rob D

Helpful (0)

Where do you connect them to and how so?

RyanQ

  • The Axial Flexible LED Strip can be wired to any 12v source providing a number of installation options, from wiring to an independent switch to hooking to interior lighting to use as entry lighting.

    Rob D

Helpful (0)

Can you hook it up to a spod to turn it on or off?

PhillipK

  • Hello, this LED strip is designed to work in conjunction with your Wrangler's 12V system and yes, it can be wired up to a switch.

    XTNunoP

Helpful (0)

More Products You Might Like

Customer Reviews (13) Write a Review

Overall Rating 4.3

out of 5 stars

Installation Time:Afternoon

Installation Cost:$100-$250

  • Brightness 4.461538 4.5
  • Fit 4.923077 4.9
  • Appearance 4.692307 4.7
  • Bang For Your Buck 4.384615 4.4



  • 5/5

    Installation Time: Afternoon

    May 14, 2015

    Review from Axial Flexible LED Strip 36 in. - Blue (87-14 Wrangler YJ, TJ, JK)

    Bright Lights!!

    These lights gave my jeep an awesome appearance!! Got it wired up with ease and puts of an excellent amount of light to make the jeep pop!

    Brandon24

    Year: 2012Joshua,TX

    Helpful (2)

  • 4/5

    Installation Time: Shop Install

    Installation Cost: $100-$250

    January 25, 2017

    Review from Axial Flexible LED Strip 36 in. - Green (87-14 Wrangler YJ, TJ, JK)

    There pretty

    This lights that I decided to put on underneath my front bumper just wanted some color wanted something to go with my pink or purple halos I had installed as well

    Nicolesjeep

    Year: 2008Submodel: Wrangler

    Helpful (1)

  • 4/5

    Installation Time: Less than 1 Hour

    June 21, 2016

    Review from Axial Flexible LED Strip 36 in. - w/ ColorSHIFT Controller (87-14 Wrangler YJ, TJ, JK)

    Cool lights, lot of fun

    Love the lights, easy to install except the tape didn't stick as well to the interior plastic(I used some more industrial tape that I had lying around). Other than that, these lights rock.

    MrNatural

    Year: 2014Submodel: Rubicon

    Helpful (1)

  • 4/5

    Installation Time: Less than 1 Hour

    June 14, 2016

    Easy install

    The led was an easy install that has cutting points that are already in place for you to cut if needed to. The sticky back of the LED stripe makes it easy to placed without having to drill any holes in the body of the jeep. It takes about an hour to install but overall the product puts out great lighting and makes your jeep stand out.

    Kincaid112

    Year: 2005Submodel: Wrangler

    Helpful (1)

  • 4/5

    Installation Time: Less than 1 Hour

    May 15, 2016

    Amazing

    This product is great for night time show.. Easy installation..

    Dakota

    Year: 2008Submodel: Wrangler Unlimited

    Helpful (1)

  • 4/5

    Installation Time: Less than 1 Hour

    March 15, 2016

    Review from Axial Flexible LED Strip 36 in. - Green (87-14 Wrangler YJ, TJ, JK)

    Led Lights

    We decided to put these on the inside of the jeep. With it just have 3m tape to hold it did not think it would hold up on the outside. But my kids love it!

    JeepGirl86

    Year: 2000Submodel: WranglerNashville, IN 47448, USA

    Helpful (1)

  • 4/5

    Installation Time: Less than 1 Hour

    November 10, 2015

    Review from Axial Flexible LED Strip 36 in. - Green (87-14 Wrangler YJ, TJ, JK)

    good effect for a wrangler

    i installed inside my light on the backside of my rollbar green glow very cool

    alltrades

    Year: 2004Wadsworth, OH, USA

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    June 22, 2015

    Review from Axial Flexible LED Strip 36 in. - Green (87-14 Wrangler YJ, TJ, JK)

    Cool rock light

    This is a cool courtesy light, and rock light, but not bright enough so I will be adding white ones for extra rock lights.

    Textigger63

    Year: 1993Fayetteville, AR, USA

    Helpful (1)

  • 4/5

    Installation Time: Shop Install

    Installation Cost: $100-$250

    May 14, 2015

    Review from Axial Flexible LED Strip 36 in. - White (87-14 Wrangler YJ, TJ, JK)

    Love my lights!

    Love my white LED lights on my Jeep! Early Sat. morning I took my baby to get them put on. Took about an hour to install. Had to be attached to a powersource.

    Koji

    Year: 2014West Memphis, AR, USA

    Helpful (1)

  • 3/5

    July 01, 2017

    Review from Axial Flexible LED Strip 36 in. - Amber (87-14 Wrangler YJ, TJ, JK)

    Okay. not too bright

    fell off the jeep after about the first month. wouldn't recommend

    Jacob

    Year: 1997Submodel: Wrangler

    Helpful (0)

  • 5/5

    Installation Time: Less than 1 Hour

    June 08, 2017

    Review from Axial Flexible LED Strip 36 in. - White (87-14 Wrangler YJ, TJ, JK)

    Easy lighting upgrade

    Easy to install and give off way more light that i thought they would. Looks good riding the roads at night or on the trail.

    KevinH

    Year: 1999Submodel: Wrangler

    Helpful (0)

  • 5/5

    Installation Time: Afternoon

    April 13, 2017

    ON THE DOORS INSTALLATION

    I install mine on the bottom of my half doors and wired the up to the dome lights and they look fantastic!! The installation took about 45minutes a side. Be careful when you remove the paper on the double sided tape I ruined my first set by pulling the the tape and paper without knowing it

    BobN

    Year: 1997Submodel: Wrangler

    Helpful (0)

  • 5/5

    Installation Time: Afternoon

    March 03, 2017

    Review from Axial Flexible LED Strip 36 in. - Blue (87-14 Wrangler YJ, TJ, JK)

    Good

    Very bright and very tough and doesn't break I really like the lights

    ParkerH

    Year: 1991Submodel: Wrangler

    Helpful (0)