Excessive Industries Fender Chop Brackets; Bare Steel (18-26 Jeep Wrangler JL, Excluding Rubicon)Find parts that fit my vehicle

If you have a JL or JLU with big off road tires, you likely found out rather quickly that the factory fenders have some major clearance issues. But if you have the two piece fenders, there's a simple and clean solution for you!

Our JL and JLU Non Rubicon Fender Chop Brackets allow you to separate the two piece fender and gain a substantial amount of clearance, all while keeping the color matched portion of the factory fender securely mounted to your Jeep.

We have taken the time to design the bracket so it comes all the way up to the leading edge of the fender to give you as much clearance as possible.

These Fender Chop Brackets are completely bolt on and only require you to drill a single 1/4" hole in the fender to attach it to the bracket. They are formed from a single piece of material and available in 11 Gauge Steel or 1/8" Aluminum.

Brackets are also available with or without the 3/4" hole for a turn signal/DRL light.

On the set up shown, the forward facing light functions as both a turn signal and a DRL. The side facing light in the fender is a running light. Installing the running light requires an additional 3/4" hole to be drilled in the fender.

Brackets will be shipped with stainless steel button head bolts instead of the grade 8 bolts shown in the pictures.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov