Top Performance Driving.
Add a little bit of aggression to your stance with Eibach Front Pro-Lift Springs. These front springs are designed to provide suspension lift for your vehicle without the use of coilover system or spacer lifts. Upgrade your stock spring to Eibach Pro-Lift and enjoy a full range of suspension travel without additional stress on bushings and ball-joints.
Each Eibach Front Spring has been precision engineered for better off-road capability. It is manufactured from heavy-duty steel and finished with a silver powder coat to resist corrosion and abrasion in practically any climate or application. It features a block-resistant design for sag-free consistent ride height.
583 lbs/in. Spring Rate.
Pro-Lift Front Springs offer a 2 in. lift to get better fender clearance for larger wheels and tires. Additional rate reduces nose dive and increases load handling capabilities and control. A multi-level spring perch adjustment on coil-over shock applications helps accommodate increased loads for maximum clearance.
Professional installation is recommended for these front lowering coils springs. We strongly recommend using a floor-mounted or wall-mounted spring compressor rated for full-size truck springs to install the Eibach Pro-Lift Coil Springs to avoid possible injury or death.
All Eibach Front Springs are covered by a Million-Mile Warranty. The Warranty covers the Products against factory defects in material and workmanship, other than coatings, when used on passenger cars and light-duty (class 1-3) trucks under normal use and operating conditions. Please visit the manufacturer site for more information.
These Eibach Front Pro-Lift Springs fit the 2018-2020 Jeep Wrangler JL 4 Door model.
Application Note. For OEM Fox 3.0 Coilovers Only, the
springs were specifically designed for the stock Fox 3.0 coilovers and are not guaranteed to fit aftermarket coilover assemblies.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov