(approx) 1 Minute
Simple installation for anyone.
$14.27 (each)FREE Shipping on orders over $75
Features, Description, Reviews, Q&A, Specs & Installation
Construction. This Daystar rocker switch has a 20-amp marine-grade 3-pole design and illuminates red when turned on. It allows you to color coordinate switches for aftermarket upgrades while maintaining the look of your dash.
Installation. The Daystar rocker switch installs quickly for the perfect fit in Daystar's switch panels. It also fits on selected switch blanks available on a most OEM dashes.
Application. This rocker switch is designed for 1987-2020 Jeep Wrangler YJ, TJ, JK and JL models.
Fitment: 1987 1988 1989 1990 1991 1992 1993 1994 1995 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
November 17, 2019
they sit very proud of the surface. I wish they sat flush like the other switches.Helpful (1)
September 22, 2019
A Pillar Switch
Worked great, easy install. Worked with Daystar A pillar switch housing. Highly recommend both productsHelpful (1)
August 01, 2019
Bought this to mount on the dash between my dash speaker and a/c vent on the left hand side of my steering wheel. I'm sure someone who is more comfortable with a dremel and running wires could do it but I ended up not using this switch as i didn't think I could get it to fit without messing my dash up. I did test it with a 9 volt to see if the led worked and it was nice and bright without being overbearing. The rocker switch seemed like it is quality. Much sturdier than those we have on our ambulances. I may end up putting this on the A pillar in a box down the road if i decide to add any other lights to the Jeep. Would definitely buy again.Helpful (1)
May 23, 2019
Great switch and customer service.
This switch worked great. Have four of them. Put them into the a pillar switch pod. They have a great light output in the switch (not too bright while driving to effect your night vision) and are very responsive (no lag or heat upon extended use with the leds I'm using). Customer service from extreme terrain was phenomenal.Helpful (1)
May 05, 2019
Awesome little mod
I hooked up the rocker switch to some LED lights I bought here as well. Super easy install and came with a diagram for the light hook ups. Takes a little effort to put it into the console, but it fits nice.Helpful (1)
February 16, 2019
Works great, but it bugs me that the accessory light stays on even with the key off. Its probably not enough to run down a good battery, but my original switch only lit up when the switch was on.Helpful (4)
February 11, 2019
This is a very high quality electrical switch. Easy to use and install. Even if you don’t have great electricit experience you will be able to install this rocker switch.Helpful (4)
February 10, 2019
Daystar rocket switch
Product is top notch Easy set up, fits great in switch panel. Nice illuminationHelpful (4)
September 21, 2018
Very good product. Was really simple to install! Highly recommend this rocker switch for putting LED Lights on your off-road vehicle.Helpful (7)
July 06, 2018
Good little switch
Exactly what I ordered. Works well. for auxiliary lighting. Fit and Finish is good.Helpful (8)
Will this switch fit in the stock location of a 2017 Wrangler where the anti slip button is? If not do you have any that will?
The Daystar Rocker Switch is a standard rocker switch size. Unfortunately the Wrangler does not utilize a switch panel that fits standard rocker switches. At this time we do not carry any switches that will fit in the OEM switch location.
Will this switch replace the factory foglight and rear defrost switches on a 1999 TJ.
This would not replace the factory switches.
Is the light on the switch green or is it a clear light with a green lens over it?
This would have a clear light with a green lens.
Is it possible to get the physical dimensions of either the switch hole or the switch to see if other switches can be used?
These rocker switches will come in a standard large size. At .867" x1.734" (22mm x 44mm) in size.
Is there any way to hook two wiring harnesses to this switch? Thanks
The Daystar Rocker Switch will have 3 terminals on the back, this will allow for several wiring options, which could be used to wire up multiple accessories, however this will only be rated for 20a. For running multiple accessories, where total current draw is less than 20a, both accessories power wires could be hooked to the output, however we would typically recommend wiring the switch to a relay to control your accessories, or to run this as a ground side switch to prevent issues with overloading this switch.
The Daystar Rocker Switch will be of a standard rocker switch mounting design, and will fit any switch panel designed to accept standard depth switches.
Hello, the switch doesn't require a specific wiring harness, it depends although on the type of lights you are using, for example, if you are using LED lights, we would recommend an LED Wiring Harness and, also the output that the lights are putting out and getting wiring that can sustain that power output.
Hello, this will not fit where factory lockers and sway bar disconnect are currently, unfortunately we do not have those replacement switches.
(approx) 1 Minute
Simple installation for anyone.
What's in the Box