Protection the Clutch Disc.
As your Jeep’s OEM front retainer seal gets exposed to the outdoor grime, it becomes hard and brittle. The engine oil easily bypasses the rubber seal and contaminates the clutch, and this eventually prevents the clutch from disengaging. By installing the Omix-ADA NP231/NP241/NV241OR Transfer Case Front Retainer Seal early enough, you will prevent a breakdown of the transmission system. The rubber around the metallic plate seals off the engine fluid thus stopping further damage.
Eliminates Missed Shifts.
By sealing off the engine oil through installing a brand new Omix-ADA NP231/NP241/NV241OR Transfer Case Front Retainer Seal, you will have prevented the contamination of the clutch disk. The clutch will perform at optimal levels, which will eliminate missed shifts.
The seal’s rubber material is well laid around the metallic piece. Because of this it holds off the engine oil no matter the thrust or vibration as you drive the Jeep. Omix-ADA gives a 12-month/12,000-mile warranty in case of a material defect in this seal.
Installing the Omix-ADA NP231/NP241/NV241OR Transfer Case Front Retainer Seal is mainly a bolt-on process. However, the services of a professional are recommended as the installation entails opening up wired systems near the transmission system.
1-Year Limited Warranty.
To insure you against material defects, Omix-ADA offers a 1-year or 12,000-mile warranty on Omix-ADA NP231/NP241/NV241OR Transfer Case Front Retainer Seal. For exclusions, please check manufacturer’s warranty.
The Omix-ADA NP231/NP241/NV241OR Transfer Case Front Retainer Seal is cut to work on all 2003-2018 Jeep Wrangler TJ & JK models.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov