Critical Piece of the Braking System.
If you have ever stepped on your brake pedal and had it go completely to the floor, or if, in the course of driving, you have had to pump the brake pedal in order to get your Jeep to stop, then you need to service your brakes immediately and more specifically, your master cylinder. The Omix-ADA Brake Master Cylinder is a superior replacement part for your factory master cylinder and will bring back the pressure to your brake system that will make your vehicle safe and enjoyable to drive again.Stock Replacement.
It is critical to the proper operation of your brake system that your master cylinder fit perfectly and with no leaks. The Omix-ADA Brake Master Cylinder is a better-than-OEM replacement part that meets or exceeds factory specifications thus, you can install or have it installed with confidence.Installation Issues.
The brake system on your Jeep, as with most cars, is a hydraulic system that relies on pressure to engage the brakes. The master cylinder is the controller of that system and provides pressure via a plunger and valves or seals in the cylinder through the brake lines to both the front and rear brakes. In order to install this master cylinder you must have an understanding of hydraulic brake systems and the nuances involved, including the need to bleed the system once the part is replaced, getting the system back to full efficiency. If you do not have this knowledge then it is recommended that you take this part to a certified brake specialist and have them install it and service your brake system.Application.
The Omix-ADA Brake Master Cylinder fits 1995 4.0L Jeep Wrangler YJ models.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov