Clayton Off Road Adjustable Front Track Bar with Drop Bracket (97-06 Jeep Wrangler TJ)

Description. Jeep Wrangler TJ 1997-2006, Jeep Wrangler LJ 2004-2006 Adjustable Front Trackbar W/Drop Bracket

Our adjustable track bar gives you the strength and adjustability your lifted Jeep needs. A forged johnny joint is used at the frame end, and a dual durometer, maintenance free, high quality GIIRO Joint bushing is pressed into a machined housing on the axle end. What is different about this trackbar is the lower bushing.

Many customers have complained that their stock, or previous trackbar has loosened up and damaged and egged out the factory hole. This trackbar uses a much larger 9/16s Grade 8 bolt to allow you to drill out your factory location and easily upgrade to this HD bushing.

Put it simply, this is the strongest, most adjustable track bar on the market. Track bar comes powdercoated black. Comes with a 9/16 hardware and a new lower flange tab to fit into the OE location at the axle side. The heavy duty 5/16 laser cut trackbar drop bracket lowers the trackbar angles. The bracket bolts into the OEM location for alignment purposes ONLY, and needs to be fully welded for superior strength over a bolt on design bracket. This bracket not only minimizes trackbar angles, but puts the bolt in double sheer adding strength. By using the track bar in double sheer you eliminate any chance of over flexing the joint.

Track bar - Center to Center Min = 31-1/8", Max = 32-3/16"NOTE: 1. Drilling and welding is required to install this trackbar.

Warranty. Lifetime Warranty

Fitment:

• 1997 Jeep Wrangler
• 1998 Jeep Wrangler
• 1999 Jeep Wrangler
• 2000 Jeep Wrangler
• 2001 Jeep Wrangler
• 2002 Jeep Wrangler
• 2003 Jeep Wrangler
• 2004 Jeep Wrangler
• 2005 Jeep Wrangler
• 2006 Jeep Wrangler

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov