C4 Fabrication Overland Series High Clearance Rear Bumper with Full-Length Swing Arm and without Side Tubes; Passenger Side Pivot; Raw (16-23 Tacoma w/o Blind Spot Monitoring & Rear Parking Sensors)Find parts that fit my vehicle

This bumper requires cutting of the side panels; Professional installation is recommended but not required. Blind spot monitoring system is not supported with this bumper.Lower portion of bedsides behind rear fenders need to be cut off for Hi-Clearance bumper to fit onto the vehicle.3/4” thick D-ring tabs fully welded front and back come standard.Comes standard with hidden hitch.License plate flips up for access to receiver hitch and trailer wiring connection.License plate light included.All Tacoma rear bumpers come with the reverse light cutouts. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.Aftermarket rear suspension/lift recommended but not required.150lbs without swing arm, 250lbs with swing arm and accessories.Jerry can carrier is designed to fit multiple brands of cans including Midwest, Scepter, NATO, and some jerry can shaped storage containers.Unless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov