C4 Fabrication Lo-Pro Winch Front Bumper with 30-Inch Light Cutout; Black (16-23 Tacoma)Find parts that fit my vehicle

Features
Slots in front of bumper allow for easy winch access.
3-4” thick D-ring tabs fully welded front and back come standard.
Unless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.
Weighs 75lbs

Fitment
The C4 Logo is now cut into the light bar cutout area. C4 Fab will no longer be cut into the lower portion of the bumper as some of the photos show.
Cutting out the center section of the original plastic bumper is required
Works with TRD PRO Skid Plate
Bull bar is compatible with Toyota Safety Sense - only on models Without the TRD Pro grille

Add-Ons
Fits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).
We recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper. Does not fit Warn Epic Fairlead
Bumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series will also fit.

The Lo-Pro Winch Bumper is engineered for strength, clearance, and clean styling while keeping recovery gear tucked in tight. Designed for 3rd Gen Tacomas, this bumper integrates seamlessly with your truck’s lines while packing serious capability.
Built to house most 8k-12k winches, the recessed winch mount allows for discreet placement and easy access through front slots. We recommend winches with synthetic rope and a hawse fairlead for the best fit. Integrated control box winches may require minor trimming of the grille support brackets. (Commonly used winches include ComeUp, Smittybilt X20, and Warn Zeon/VR series. Not compatible with the Warn Epic fairlead.)
The bumper is designed around 30″ single-row light bars, with guaranteed fitment for the Baja Designs S8, Extreme LED 5D, and RIGID SR series. Recovery points are built into the bumper with massive 3/4″ thick D-ring tabs, fully welded front and back. At only 75 lbs, the bumper balances durability with a lightweight profile. It’s also compatible with the TRD Pro skid plate, and the optional bull bar works with Toyota Safety Sense, though not on TRD Pro grille models.
Installation does require cutting the center section of the factory plastic bumper. The bumper ships bare steel, ready for your own paint or powder coat finish to prevent rust.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov