- Driver Side Flare(s)
- Passenger Side Flare(s)
Free Shipping on Orders Over $75. Details
$345.99 (pair)FREE Shipping
Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Details
CA Residents: Warning: California's Proposition 65
Installation Time: (approx) 2 Hours
Difficulty Level:Light to Moderate mechanical skill required.
i have 35 in tires on my jk and cant get it inspected ( tires to wide) is there a flat fender style out there i can get that is wide enough ( 11.5 in. ) that will make it street legal ?
The Bushwacker Pocket Flares provide up to 11.75” on tire clearance, so depending on the backspacing of your wheel and tire set up these should have enough coverage. The Rugged Ridge Hurricane Fender Flare Kit might be a good option for a flat fender kit or the Bushwacker Flat Style Flare Kit.
Contrary to the previous question/answer these do not allow enough space to fit the Rugged Ridge aluminum hood catches. The RR catches are wider than stock. Are there any nice catches with a base the same width as stock?
For our entire selection of hood catches for 07-18 JK Jeep Wrangler Hoods I have this link here for you! https://www.extremeterrain.com/wrangler-jeep-jk-hoods-and-grilles.html#shop-by2
I wanted to know if these will fit with Rugged Ridge Hood Latches for my 2015 JKU In the photos it looks like it covers the latch?
The Bushwacker Pocket Flares are compatible with the Rugged Ridge Aluminum Hood Catch Kit.
Installation Time: Afternoon
August 08, 2018
So this product has been on my Jeep for about 3 months... when driving on the highway there is a bit of a hum and they same and feel very flimsy. I don’t see how these could possibly withstand any kind of protection because they are just poorly made. You’re not getting the bang for the buck here. I would recommend another style of fender flares
Bang for your Buck 2
May 16, 2018
Not the Bushwhacker of old
I wouldn't recommend had fitment issues and flares were not moulded correctly. The material itself is very light gauge ie cheap. For the money I would look elsewhere
Bang for your Buck 1
December 11, 2017
Look good in picture
Received Items in opened up painted everything then found the left front fender was missing 3 holes and the plastic wasn't cut correctly and the right side holes don't line up with the inner fender bracket. Very poorly made!!!!
Bang for your Buck 3
October 07, 2017
Trying to keep mud off sides
We had a wet winter here and with new wheels I needed to get a little more protection from road smuck these did help.
Bang for your Buck 5